OS-365P
/ OS-365PA / OS-365S
TECHNICAL S PECIFICATIONS
R a t e d Vo l t a g e
2 3 0 V ~
±
1 0 % 5 0 / 6 0 H z
A d j u s t a b l e f r o m 1 0 L u x t o 2 0 0 0 L u x
R a t e d L o a d
T i m e 1 ( f o r l i g h t i n g ) : A d j u s t a b l e f r o m 5 s e c
t o 3 0 m i n a n d t e s t &
T i m e 2 ( f o r H V A C ) : A d j u s t a b l e f r o m 1 0 s e c
t o 6 0 m i n
A u t o O f f T i m e
A d j u s t m e n t
L u x
A d j u s t m e n t
Φ
t o a p p r o x .
Φ
8 m ( + ) a t t h e h e i g h t o f 2 . 5 m
A d j u s t a b l e f r o m a p p r o x . 1 m ( - )
M e t e r
A d j u s t m e n t
O p e r a t i n g
T e m p e r a t u r e
0
o
C t o + 4 5
o
C
E n v i r o n m e n t a l
P r o t e c t i o n
D e t e c t o r
P o w e r b o x : I P 2 0
: I P 4 0
RJ-12 plug
1 m s i g n a l c a b l e
D e t e c t i o n
R a n g e
o
3 6 0 c o n e s h a p e , u p t o 8 m a t
h e i g h t o f 2 . 5 m
Φ
i n s t a l l a t i o n
L o a d
Ⅰ
( L ) f o r L i g h t i n g
:
L o a d
Ⅱ
( D 1 - D 2 ) f o r H V A C
( P o t e n t i a l f r e e
c o n t a c t
M a x . 5 A
μ
f o r 2 5 0 V A C o r 3 0 V D C M a x ) :
( c o s
φ
= 1 )
M o t o r : 1 / 1 0 H P ( a p p r o x . 7 3 W )
A n i n d e p e n d e n t d e t e c t o r w i t h 8 m s i g n a l
c a b l e c a n b e c o n n e c t e d t o t h e p o w e r b o x
o f O S - 3 6 5 P f o r t h e a p p l i c a t i o n o f
e x p a n d i n g d e t e c t i o n c o v e r a g e .
1 S
1 S
O S - 3 6 5 P
( 2 C h a n n e l s )
O S - 3 6 5 P A
( 1 C h a n n e l )
F o r L i g h t i n g
: μ
O S - 3 6 5 S
( f o r o p t i o n a l
p u r c h a s e )
O S - 3 6 5 P /
O S - 3 6 5 S
O S - 3 6 5 P A
T i m e : A d j u s t a b l e f r o m 5 s e c t o 3 0 m i n a n d
t e s t &
OPTIMUM MOTION DETECTOR
CEILING FLUSH MOUNT VERSION
Incandescent Lamp: Max. 2000W
AC halogen Lamp
: Max. 1000W
LV halogen Lamp
: Max. 1000VA
Fluorescent lamp
:
Max. 900VA / 100μF
(compensated)
Max. 1000VA
(uncompensted)
PL Lamp
:
Max. 600VA
Incandescent Lamp: Max. 2000W
AC halogen Lamp
: Max. 1000W
LV halogen Lamp
: Max. 1000VA
Fluorescent lamp
:
Max. 900VA / 100μF
(compensated)
Max. 1000VA
(uncompensted)
Max. 2A (cos
φ
=0.4) for 250VAC
<
2.2 Dimension (See FIG.1-A & FIG.1-B)
Detector
:
Φ
80 x 53mm
Power box: 140 x 60 x 31.5mm
2
PRODUCT DESCRIPTION
2.1 Features
1
PACKAGE CONTENTS
Power box
1
1
1
1
1
1
FLUSH MOUNT
PRESENCE DETECTOR
OS-365
/ OS-365A / OS-365S
FLUSH MOUNT
PRESENCE DETECTOR
OS-365
/ OS-365A / OS-365S
High performance relay for connecting various lamps.
Invisible ceiling flush mount type: Easy to be installed in
different thickness of ceiling boards.
The detector of OS-365P and OS-365S can be paralleled
on one power box to enlarge detection coverage.
o
High sensitivity with "no dead spot" zones in its 360 high
intensity of detection even for a small movement such as
hand waving . To resolve dead angle of most current
selling ceiling
in the market.
The detector head can be easily
vertically
and horizontally
for u
Two relays for switching outputs of OS-365P: One relay for
lighting and another voltage free relay for HVAC (Heating,
Ventilation, Air Conditioning).
RJ-12 plug and socket for quick and easy connection.
A built-in red LED is used as an indicator for easy test
operation and status of triggering.
Unique design of knockout is applicable for connecting
cables with different dimensions.
Non-dropping caps of power box are convenient for
installation.
AutoLearn Adjusting function to solve the false on and false off
problems.
detector
adjusted
ser to gain the desired detection
angle.
o
30
o
350
Pattern
Item
Quantity
Pattern
Item
Quantity
OS-365P or OS-365PA
Lens
shield
Lens
shield
OS-365S
OS-365S
(for optional pruchase)
OS-365P / OS-365PA
Detector
Manual
Manual
FIG.2
FIG.3
60
31.5
140
Φ
80
53
19
Φ
65
FIG.1-A
FIG.1-B
3.1.1 It is recommended to install at the height of 2.5m. The
detection range can reach up to 8m diameter, and
detection angle (See FIG.2).
o
360
3
INSTALLATION AND WIRING
Please disconnect power completely and read the
entire instruction manual carefully before installation.
4m
4m
2.5
2.5
0 0.75
0.75
3.1 Select a proper location
Since the detector is in response to temperature change,
please avoid the following conditions (See FIG.4-A &
FIG.4-B):
3.1.3 Helpful tips for installation
Avoid mounting the detector near heat sources, such as
heating vents, air conditioning, vents as dryers, lights, etc.
Avoid aiming the detector toward the objects which may be
swayed in the wind, such as curtain, tall plants, miniature
Avoid aiming the detector toward the objects whose
surfaces are highly reflective, such as mirror, monitor, etc.
garden, etc.
Top view
o
360
Φ
8m
Φ
5m
Φ
1.5m
Side view
2.
5m
3.1.2 Pay attention to the walking direction in the test
proceeding. It is more sensitive to movement across the
detector and less sensitive to movement directly
towards to detector which will reduce the detection
coverage (See FIG.3).
More sensitive of movement
walking across to detector
Less sensitive of movement
directly towards to detector
Power box
L
J
N
L
N
D1
D2
RJ-12
socket
RJ-12
socket
Power box
L
J
N
L
N
D1
D2
RJ-12
socket
RJ-12
socket
OS-365P
Power box
L
J
N
L
N
D1
D2
RJ-12
socket
RJ-12
socket
W
FIG.4-A
FIG.4-B
FIG.6
FIG.7
Load
Load
L1
L
N
N
Supply
voltage
L2
L3
Fan
M
Heater
Contactor
A1
A2
N
Manual SW
Manual SW
3.2 Wiring
Connecting cables to terminals (See FIG.5) refer to wiring
diagrams (FIG.6 - FIG.11).
FIG.5
Earth terminal
3.2.1 Override function
The detector can be bypassed to keep the light(s) on if
required. When the connected manual switch (Manual SW)
is closed, the detector is overrided and the controlled load
stays on. Whereas the connected manual switch is opened,
the detector can resume to work normally. Please refer to
the wiring diagram (FIG. 6 & FIG.9) for the connection of
manual switch and detector for this function.
3.2.2 OS-365P
3.2.2.1 OS-365P for standard application (See FIG.6).
3.2.2.2 One load is controlled by two power boxes (See FIG.7).
OS-365P
OS-365S
(option)
OS-365S
(option)
OS-365S
(option)
OS-365P
W
Power box
L
J
N
L
N
D1
D2
RJ-12
socket
RJ-12
socket
Power box
Power box
L
L
JJ
N
N
L
L
N
N
RJ-12
socket
RJ-12
socket
OS-365PA
Power box
L
J
N
L
N
RJ-12
socket
OS-365PA
Power box
L
J
N
L
N
RJ-12
socket
OS-365PA
FIG.8
1S
1S
Load
Load
Load
Load
L
L
L
L
N
N
N
N
Manual SW
3.2.3.1 OS-365PA for standard
(See FIG.9).
application
3.2.3.2 One load is controlled by two power boxes
(See FIG.10).
3.2.3.3 OS-365PA controls staircase timer switch (
should be set to ) (See FIG.11).
time knob
FIG.10
FIG.11
L
N
OUT IN
μ
L
N
OUT IN
μ
Staircase timer switch
Staircase timer switch
3.3 Installation procedure
NOTE
wiring.
To secure correct wiring, please re-check it carefully after
FIG.9
3.2.3 OS-365PA
OS-365P
OS-365PA
OS-365S
(option)
3.2.2.3 OS-365P controls staircase timer switch (time 1
should be set to ) (See FIG.8).
Push button
(N.O. Type)
Push button
(N.O. Type)
Drill a hole with
Φ
=65mm on the
ceiling
FIG.12
Φ
=65
FIG.14-A
Cap
Cap
3.3.1 To install the detector, please drill a hole with diameter
of 65mm on movable ceiling board and keep the power
cable outside. Please strip off 6-8mm of cable
sheathing for wiring (See FIG.12).
NOTE
3.3.2 Unscrew the screw on the left cap of power box with a
"+" type screwdriver, then open the cap on the two
sides of power box with a "-" type screwdriver
(See FIG.14-A). RJ-12 sockets are for detectors
connection and terminals are for load and power supply
(See FIG.14-B).
Max. 8m
Φ
=65
Φ
=65
FIG.13
6 - 8mm
A circuit breaker (250VAC, 10A) type C according to
EN60898-1 of load
Ⅰ
shall be installed in the fixed wiring
for protection.
A circuit breaker (250VAC, 6A) type C according to
EN60898-1 of load
Ⅱ
shall be installed in the fixed wiring
for protection.
Do not mount on conductive surface. Do not open the
enclosure frequently.
Turn off power when change the light sources.
High in-rush current would be caused when bulbs of
certain brands burned which might damage the unit
permanently.
CAUTION!
During installation, all the requirement of mentioned
standard must be fulfilled when installing, also insulation
and requirements of interconnection cord between power
box and detector shall be considered.
Please keep the installation distance between two
detectors within 8m (See FIG.13) if OS-365S is connected
to power box of OS-365P, and the thickness of ceiling
board is 5 - 20mm (See FIG.18).
Installation and assembly of electrical equipment
must be carried out by qualified electricians.
Contact a qualified electrician in the event of
fault or break down.
OS-365P / OS-365PA is a ceiling flush mount motion detector for
lighting and HVAC control. It can be widely used in small-scale
office, warehouse, storeroom, kitchen, publicwashing room etc.
Part No. CPD-360; CPD-360/2; CPD-360/2S
FLUSH MOUNT
PRESENCE
DETECTOR
CPD-360/2
CPD-360/2 / CPD-360
CPD-360/2S
CPD-360/2 or CPD-360
CPD-360/2 or CPD-360
CPD-360
CPD-360/2S
CPD-360
CPD-360/2/
CPD-360/2S
AS/NZS60898.1
AS/NZS60898.1
CPD-360/2S
CPD-360
CPD-360/2
CPD-360/2
CPD-360/2
CPD-360
CPD-360
CPD-360/2
CPD-360/2
CPD-360/2S
CPD-360
CPD-360
CPD-360
CPD-360
CPD-360/2
CPD-360/2
CPD-360/2S
CPD-360
CPD-360/2S
CPD-360/2S
CPD-360
CPD-360/2S
CPD-360/2
CAUTION - WE RECOMMEND
which may permanently damage
(uncompensated)
(uncompensated)
Disconnect power when changing the light sources.
High in-rush current may occur when lamps of certain
brands burnout, this may permanently damage the
sensor.
(uncompensated)
Used in commercial office, warehouse,
storeroom, kitchen, public wash room etc.
Avoid aiming the detector toward objects with highly reflective
surfaces, such as mirrors, monitors etc.
overridden
requirements of mentioned
standards
objects which may be
.
to expand detection area.
OS-365P / OS-365PA / OS-365S
TECHNICAL S PECIFICATIONS
R a t e d Vo l t a g e
2 3 0 V ~
±
1 0 % 5 0 / 6 0 H z
A d j u s t a b l e f r o m 1 0 L u x t o 2 0 0 0 L u x
R a t e d L o a d
T i m e 1 ( f o r l i g h t i n g ) : A d j u s t a b l e f r o m 5 s e c
t o 3 0 m i n a n d t e s t &
T i m e 2 ( f o r H V A C ) : A d j u s t a b l e f r o m 1 0 s e c
t o 6 0 m i n
A u t o O f f T i m e
A d j u s t m e n t
L u x
A d j u s t m e n t
Φ
t o a p p r o x .
Φ
8 m ( + ) a t t h e h e i g h t o f 2 . 5 m
A d j u s t a b l e f r o m a p p r o x . 1 m ( - )
M e t e r
A d j u s t m e n t
O p e r a t i n g
T e m p e r a t u r e
0
o
C t o + 4 5
o
C
E n v i r o n m e n t a l
P r o t e c t i o n
D e t e c t o r
P o w e r b o x : I P 2 0
: I P 4 0
RJ-12 plug
1 m s i g n a l c a b l e
D e t e c t i o n
R a n g e
o
3 6 0 c o n e s h a p e , u p t o 8 m a t
h e i g h t o f 2 . 5 m
Φ
i n s t a l l a t i o n
L o a d
Ⅰ
( L ) f o r L i g h t i n g
:
L o a d
Ⅱ
( D 1 - D 2 ) f o r H V A C
( P o t e n t i a l f r e e
c o n t a c t
M a x . 5 A
μ
f o r 2 5 0 V A C o r 3 0 V D C M a x ) :
( c o s
φ
= 1 )
M o t o r : 1 / 1 0 H P ( a p p r o x . 7 3 W )
A n i n d e p e n d e n t d e t e c t o r w i t h 8 m s i g n a l
c a b l e c a n b e c o n n e c t e d t o t h e p o w e r b o x
o f O S - 3 6 5 P f o r t h e a p p l i c a t i o n o f
e x p a n d i n g d e t e c t i o n c o v e r a g e .
1 S
1 S
O S - 3 6 5 P
( 2 C h a n n e l s )
O S - 3 6 5 P A
( 1 C h a n n e l )
F o r L i g h t i n g
:
μ
O S - 3 6 5 S
( f o r o p t i o n a l
p u r c h a s e )
O S - 3 6 5 P /
O S - 3 6 5 S
O S - 3 6 5 P A
T i m e : A d j u s t a b l e f r o m 5 s e c t o 3 0 m i n a n d
t e s t &
OPTIMUM MOTION DETECTOR
CEILING FLUSH MOUNT VERSION
Incandescent Lamp: Max. 2000W
AC halogen Lamp : Max. 1000W
LV halogen Lamp : Max. 1000VA
Fluorescent lamp : Max. 900VA / 100
μ
F
(compensated)
Max. 1000VA
(uncompensted)
PL Lamp : Max. 600VA
Incandescent Lamp: Max. 2000W
AC halogen Lamp : Max. 1000W
LV halogen Lamp : Max. 1000VA
Fluorescent lamp : Max. 900VA / 100
μ
F
(compensated)
Max. 1000VA
(uncompensted)
Max. 2A (cos
φ
=0.4) for 250VAC
<
2.2 Dimension (See FIG.1-A & FIG.1-B)
Detector
:
Φ
80 x 53mm
Power box: 140 x 60 x 31.5mm
2
PRODUCT DESCRIPTION
2.1 Features
1
PACKAGE CONTENTS
Power box
1
1
1
1
1
1
FLUSH MOUNT
PRESENCE DETECTOR
OS-365 / OS-365A / OS-365S
FLUSH MOUNT
PRESENCE DETECTOR
OS-365 / OS-365A / OS-365S
High performance relay for connecting various lamps.
Invisible ceiling flush mount type: Easy to be installed in
different thickness of ceiling boards.
The detector of OS-365P and OS-365S can be paralleled
on one power box to enlarge detection coverage.
o
High sensitivity with "no dead spot" zones in its 360 high
intensity of detection even for a small movement such as
hand waving . To resolve dead angle of most current
selling ceiling
in the market.
The detector head can be easily
vertically
and horizontally
for u
Two relays for switching outputs of OS-365P: One relay for
lighting and another voltage free relay for HVAC (Heating,
Ventilation, Air Conditioning).
RJ-12 plug and socket for quick and easy connection.
A built-in red LED is used as an indicator for easy test
operation and status of triggering.
Unique design of knockout is applicable for connecting
cables with different dimensions.
Non-dropping caps of power box are convenient for
installation.
AutoLearn Adjusting function to solve the false on and false off
problems.
detector
adjusted
ser to gain the desired detection
angle.
o
30
o
350
Pattern
Item
Quantity
Pattern
Item
Quantity
OS-365P or OS-365PA
Lens
shield
Lens
shield
OS-365S
OS-365S
(for optional pruchase)
OS-365P / OS-365PA
Detector
Manual
Manual
FIG.2
FIG.3
60
31.5
140
Φ
80
53
19
Φ
65
FIG.1-A
FIG.1-B
3.1.1 It is recommended to install at the height of 2.5m. The
detection range can reach up to 8m diameter, and
detection angle (See FIG.2).
o
360
3
INSTALLATION AND WIRING
Please disconnect power completely and read the
entire instruction manual carefully before installation.
4m
4m
2.5
2.5
0 0.75
0.75
3.1 Select a proper location
Since the detector is in response to temperature change,
please avoid the following conditions (See FIG.4-A &
FIG.4-B):
3.1.3 Helpful tips for installation
Avoid mounting the detector near heat sources, such as
heating vents, air conditioning, vents as dryers, lights, etc.
Avoid aiming the detector toward the objects which may be
swayed in the wind, such as curtain, tall plants, miniature
Avoid aiming the detector toward the objects whose
surfaces are highly reflective, such as mirror, monitor, etc.
garden, etc.
Top view
o
360
Φ
8m
Φ
5m
Φ
1.5m
Side view
2.
5m
3.1.2 Pay attention to the walking direction in the test
proceeding. It is more sensitive to movement across the
detector and less sensitive to movement directly
towards to detector which will reduce the detection
coverage (See FIG.3).
More sensitive of movement
walking across to detector
Less sensitive of movement
directly towards to detector
Power box
L
J
N
L
N
D1
D2
RJ-12
socket
RJ-12
socket
Power box
L
J
N
L
N
D1
D2
RJ-12
socket
RJ-12
socket
OS-365P
Power box
L
J
N
L
N
D1
D2
RJ-12
socket
RJ-12
socket
W
FIG.4-A
FIG.4-B
FIG.6
FIG.7
Load
Load
L1
L
N
N
Supply
voltage
L2
L3
Fan
M
Heater
Contactor
A1
A2
N
Manual SW
Manual SW
3.2 Wiring
Connecting cables to terminals (See FIG.5) refer to wiring
diagrams (FIG.6 - FIG.11).
FIG.5
Earth terminal
3.2.1 Override function
The detector can be bypassed to keep the light(s) on if
required. When the connected manual switch (Manual SW)
is closed, the detector is overrided and the controlled load
stays on. Whereas the connected manual switch is opened,
the detector can resume to work normally. Please refer to
the wiring diagram (FIG. 6 & FIG.9) for the connection of
manual switch and detector for this function.
3.2.2 OS-365P
3.2.2.1 OS-365P for standard application (See FIG.6).
3.2.2.2 One load is controlled by two power boxes (See FIG.7).
OS-365P
OS-365S
(option)
OS-365S
(option)
OS-365S
(option)
OS-365P
W
Power box
L
J
N
L
N
D1
D2
RJ-12
socket
RJ-12
socket
Power box
Power box
L
L
JJ
N
N
L
L
N
N
RJ-12
socket
RJ-12
socket
OS-365PA
Power box
L
J
N
L
N
RJ-12
socket
OS-365PA
Power box
L
J
N
L
N
RJ-12
socket
OS-365PA
FIG.8
1S
1S
Load
Load
Load
Load
L
L
L
L
N
N
N
N
Manual SW
3.2.3.1 OS-365PA for standard
(See FIG.9).
application
3.2.3.2 One load is controlled by two power boxes
(See FIG.10).
3.2.3.3 OS-365PA controls staircase timer switch (
should be set to ) (See FIG.11).
time knob
FIG.10
FIG.11
L
N
OUT IN
μ
L
N
OUT IN
μ
Staircase timer switch
Staircase timer switch
3.3 Installation procedure
NOTE
wiring.
To secure correct wiring, please re-check it carefully after
FIG.9
3.2.3 OS-365PA
OS-365P
OS-365PA
OS-365S
(option)
3.2.2.3 OS-365P controls staircase timer switch (time 1
should be set to ) (See FIG.8).
Push button
(N.O. Type)
Push button
(N.O. Type)
Drill a hole with
Φ
=65mm on the
ceiling
FIG.12
Φ
=65
FIG.14-A
Cap
Cap
3.3.1 To install the detector, please drill a hole with diameter
of 65mm on movable ceiling board and keep the power
cable outside. Please strip off 6-8mm of cable
sheathing for wiring (See FIG.12).
NOTE
3.3.2 Unscrew the screw on the left cap of power box with a
"+" type screwdriver, then open the cap on the two
sides of power box with a "-" type screwdriver
(See FIG.14-A). RJ-12 sockets are for detectors
connection and terminals are for load and power supply
(See FIG.14-B).
Max. 8m
Φ
=65
Φ
=65
FIG.13
6 - 8mm
A circuit breaker (250VAC, 10A) type C according to
EN60898-1 of load
Ⅰ
shall be installed in the fixed wiring
for protection.
A circuit breaker (250VAC, 6A) type C according to
EN60898-1 of load
Ⅱ
shall be installed in the fixed wiring
for protection.
Do not mount on conductive surface. Do not open the
enclosure frequently.
Turn off power when change the light sources.
High in-rush current would be caused when bulbs of
certain brands burned which might damage the unit
permanently.
CAUTION!
During installation, all the requirement of mentioned
standard must be fulfilled when installing, also insulation
and requirements of interconnection cord between power
box and detector shall be considered.
Please keep the installation distance between two
detectors within 8m (See FIG.13) if OS-365S is connected
to power box of OS-365P, and the thickness of ceiling
board is 5 - 20mm (See FIG.18).
Installation and assembly of electrical equipment
must be carried out by qualified electricians.
Contact a qualified electrician in the event of
fault or break down.
OS-365P / OS-365PA is a ceiling flush mount motion detector for
lighting and HVAC control. It can be widely used in small-scale
office, warehouse, storeroom, kitchen, publicwashing room etc.
AutoLearn Adjusting function to solve the false on and false
off problems
OS-365P / OS-365PA / OS-365S
TECHNICAL S PECIFICATIONS
R a t e d Vo l t a g e
2 3 0 V ~
±
1 0 % 5 0 / 6 0 H z
A d j u s t a b l e f r o m 1 0 L u x t o 2 0 0 0 L u x
R a t e d L o a d
T i m e 1 ( f o r l i g h t i n g ) : A d j u s t a b l e f r o m 5 s e c
t o 3 0 m i n a n d t e s t &
T i m e 2 ( f o r H V A C ) : A d j u s t a b l e f r o m 1 0 s e c
t o 6 0 m i n
A u t o O f f T i m e
A d j u s t m e n t
L u x
A d j u s t m e n t
Φ
t o a p p r o x .
Φ
8 m ( + ) a t t h e h e i g h t o f 2 . 5 m
A d j u s t a b l e f r o m a p p r o x . 1 m ( - )
M e t e r
A d j u s t m e n t
O p e r a t i n g
T e m p e r a t u r e
0
o
C t o + 4 5
o
C
E n v i r o n m e n t a l
P r o t e c t i o n
D e t e c t o r
P o w e r b o x : I P 2 0
: I P 4 0
RJ-12 plug
1 m s i g n a l c a b l e
D e t e c t i o n
R a n g e
o
3 6 0 c o n e s h a p e , u p t o 8 m a t
h e i g h t o f 2 . 5 m
Φ
i n s t a l l a t i o n
L o a d
Ⅰ
( L ) f o r L i g h t i n g
:
L o a d
Ⅱ
( D 1 - D 2 ) f o r H V A C
( P o t e n t i a l f r e e
c o n t a c t
M a x . 5 A
μ
f o r 2 5 0 V A C o r 3 0 V D C M a x ) :
( c o s
φ
= 1 )
M o t o r : 1 / 1 0 H P ( a p p r o x . 7 3 W )
A n i n d e p e n d e n t d e t e c t o r w i t h 8 m s i g n a l
c a b l e c a n b e c o n n e c t e d t o t h e p o w e r b o x
o f O S - 3 6 5 P f o r t h e a p p l i c a t i o n o f
e x p a n d i n g d e t e c t i o n c o v e r a g e .
1 S
1 S
O S - 3 6 5 P
( 2 C h a n n e l s )
O S - 3 6 5 P A
( 1 C h a n n e l )
F o r L i g h t i n g
:
μ
O S - 3 6 5 S
( f o r o p t i o n a l
p u r c h a s e )
O S - 3 6 5 P /
O S - 3 6 5 S
O S - 3 6 5 P A
T i m e : A d j u s t a b l e f r o m 5 s e c t o 3 0 m i n a n d
t e s t &
OPTIMUM MOTION DETECTOR
CEILING FLUSH MOUNT VERSION
Incandescent Lamp: Max. 2000W
AC halogen Lamp : Max. 1000W
LV halogen Lamp : Max. 1000VA
Fluorescent lamp : Max. 900VA / 100
μ
F
(compensated)
Max. 1000VA
(uncompensted)
PL Lamp : Max. 600VA
Incandescent Lamp: Max. 2000W
AC halogen Lamp : Max. 1000W
LV halogen Lamp : Max. 1000VA
Fluorescent lamp : Max. 900VA / 100
μ
F
(compensated)
Max. 1000VA
(uncompensted)
Max. 2A (cos
φ
=0.4) for 250VAC
<
2.2 Dimension (See FIG.1-A & FIG.1-B)
Detector
:
Φ
80 x 53mm
Power box: 140 x 60 x 31.5mm
2
PRODUCT DESCRIPTION
2.1 Features
1
PACKAGE CONTENTS
Power box
1
1
1
1
1
1
FLUSH MOUNT
PRESENCE DETECTOR
OS-365 / OS-365A / OS-365S
FLUSH MOUNT
PRESENCE DETECTOR
OS-365 / OS-365A / OS-365S
High performance relay for connecting various lamps.
Invisible ceiling flush mount type: Easy to be installed in
different thickness of ceiling boards.
The detector of OS-365P and OS-365S can be paralleled
on one power box to enlarge detection coverage.
o
High sensitivity with "no dead spot" zones in its 360 high
intensity of detection even for a small movement such as
hand waving . To resolve dead angle of most current
selling ceiling
in the market.
The detector head can be easily
vertically
and horizontally
for u
Two relays for switching outputs of OS-365P: One relay for
lighting and another voltage free relay for HVAC (Heating,
Ventilation, Air Conditioning).
RJ-12 plug and socket for quick and easy connection.
A built-in red LED is used as an indicator for easy test
operation and status of triggering.
Unique design of knockout is applicable for connecting
cables with different dimensions.
Non-dropping caps of power box are convenient for
installation.
AutoLearn Adjusting function to solve the false on and false off
problems.
detector
adjusted
ser to gain the desired detection
angle.
o
30
o
350
Pattern
Item
Quantity
Pattern
Item
Quantity
OS-365P or OS-365PA
Lens
shield
Lens
shield
OS-365S
OS-365S
(for optional pruchase)
OS-365P / OS-365PA
Detector
Manual
Manual
FIG.2
FIG.3
60
31.5
140
Φ
80
53
19
Φ
65
FIG.1-A
FIG.1-B
3.1.1 It is recommended to install at the height of 2.5m. The
detection range can reach up to 8m diameter, and
detection angle (See FIG.2).
o
360
3
INSTALLATION AND WIRING
Please disconnect power completely and read the
entire instruction manual carefully before installation.
4m
4m
2.5
2.5
0 0.75
0.75
3.1 Select a proper location
Since the detector is in response to temperature change,
please avoid the following conditions (See FIG.4-A &
FIG.4-B):
3.1.3 Helpful tips for installation
Avoid mounting the detector near heat sources, such as
heating vents, air conditioning, vents as dryers, lights, etc.
Avoid aiming the detector toward the objects which may be
swayed in the wind, such as curtain, tall plants, miniature
Avoid aiming the detector toward the objects whose
surfaces are highly reflective, such as mirror, monitor, etc.
garden, etc.
Top view
o
360
Φ
8m
Φ
5m
Φ
1.5m
Side view
2.
5m
3.1.2 Pay attention to the walking direction in the test
proceeding. It is more sensitive to movement across the
detector and less sensitive to movement directly
towards to detector which will reduce the detection
coverage (See FIG.3).
More sensitive of movement
walking across to detector
Less sensitive of movement
directly towards to detector
Power box
L
J
N
L
N
D1
D2
RJ-12
socket
RJ-12
socket
Power box
L
J
N
L
N
D1
D2
RJ-12
socket
RJ-12
socket
OS-365P
Power box
L
J
N
L
N
D1
D2
RJ-12
socket
RJ-12
socket
W
FIG.4-A
FIG.4-B
FIG.6
FIG.7
Load
Load
L1
L
N
N
Supply
voltage
L2
L3
Fan
M
Heater
Contactor
A1
A2
N
Manual SW
Manual SW
3.2 Wiring
Connecting cables to terminals (See FIG.5) refer to wiring
diagrams (FIG.6 - FIG.11).
FIG.5
Earth terminal
3.2.1 Override function
The detector can be bypassed to keep the light(s) on if
required. When the connected manual switch (Manual SW)
is closed, the detector is overrided and the controlled load
stays on. Whereas the connected manual switch is opened,
the detector can resume to work normally. Please refer to
the wiring diagram (FIG. 6 & FIG.9) for the connection of
manual switch and detector for this function.
3.2.2 OS-365P
3.2.2.1 OS-365P for standard application (See FIG.6).
3.2.2.2 One load is controlled by two power boxes (See FIG.7).
OS-365P
OS-365S
(option)
OS-365S
(option)
OS-365S
(option)
OS-365P
W
Power box
L
J
N
L
N
D1
D2
RJ-12
socket
RJ-12
socket
Power box
Power box
L
L
JJ
N
N
L
L
N
N
RJ-12
socket
RJ-12
socket
OS-365PA
Power box
L
J
N
L
N
RJ-12
socket
OS-365PA
Power box
L
J
N
L
N
RJ-12
socket
OS-365PA
FIG.8
1S
1S
Load
Load
Load
Load
L
L
L
L
N
N
N
N
Manual SW
3.2.3.1 OS-365PA for standard
(See FIG.9).
application
3.2.3.2 One load is controlled by two power boxes
(See FIG.10).
3.2.3.3 OS-365PA controls staircase timer switch (
should be set to ) (See FIG.11).
time knob
FIG.10
FIG.11
L
N
OUT IN
μ
L
N
OUT IN
μ
Staircase timer switch
Staircase timer switch
3.3 Installation procedure
NOTE
wiring.
To secure correct wiring, please re-check it carefully after
FIG.9
3.2.3 OS-365PA
OS-365P
OS-365PA
OS-365S
(option)
3.2.2.3 OS-365P controls staircase timer switch (time 1
should be set to ) (See FIG.8).
Push button
(N.O. Type)
Push button
(N.O. Type)
Drill a hole with
Φ
=65mm on the
ceiling
FIG.12
Φ
=65
FIG.14-A
Cap
Cap
3.3.1 To install the detector, please drill a hole with diameter
of 65mm on movable ceiling board and keep the power
cable outside. Please strip off 6-8mm of cable
sheathing for wiring (See FIG.12).
NOTE
3.3.2 Unscrew the screw on the left cap of power box with a
"+" type screwdriver, then open the cap on the two
sides of power box with a "-" type screwdriver
(See FIG.14-A). RJ-12 sockets are for detectors
connection and terminals are for load and power supply
(See FIG.14-B).
Max. 8m
Φ
=65
Φ
=65
FIG.13
6 - 8mm
A circuit breaker (250VAC, 10A) type C according to
EN60898-1 of load
Ⅰ
shall be installed in the fixed wiring
for protection.
A circuit breaker (250VAC, 6A) type C according to
EN60898-1 of load
Ⅱ
shall be installed in the fixed wiring
for protection.
Do not mount on conductive surface. Do not open the
enclosure frequently.
Turn off power when change the light sources.
High in-rush current would be caused when bulbs of
certain brands burned which might damage the unit
permanently.
CAUTION!
During installation, all the requirement of mentioned
standard must be fulfilled when installing, also insulation
and requirements of interconnection cord between power
box and detector shall be considered.
Please keep the installation distance between two
detectors within 8m (See FIG.13) if OS-365S is connected
to power box of OS-365P, and the thickness of ceiling
board is 5 - 20mm (See FIG.18).
Installation and assembly of electrical equipment
must be carried out by qualified electricians.
Contact a qualified electrician in the event of
fault or break down.
OS-365P / OS-365PA is a ceiling flush mount motion detector for
lighting and HVAC control. It can be widely used in small-scale
office, warehouse, storeroom, kitchen, publicwashing room etc.
towards the detector, this will reduce the detection
CPD-360/2
CPD-360/2:
CPD-360/2
