RYTEC TERMINATOR DGS1500, Assembly Manual

Page: 2 / 50

This machine has been developed and designed
for the purpose of chipping wood up to the size
of 120mm, it is not suitable to insert any other
type of material into this machine.
Please make sure all wood that is passed through
this machine is natural and organic i.e there is no
screws, nails or any other debris embedded in the wood.
The tow bar is to be connected to a ball joint connector
only.
Tow vehicles must have 4 wheels and be stable. This
can only be towed UP TO A MAXIMUM OF 50MPH
on public roads and the towing vehicle must have the
required towing capacity to tow this machine (this will
be outlined in the vehicle manual)
DGS1500 Intended use statement
You must read below before operating this machine