![background image](http://html1.mh-extra.com/html/ryobi/tss121/tss121_operators-manual_1506689023.webp)
23 − English
Fig. 24
SOCKET HEAD
SCREW(S)
SLIDING
MITER
FENCE
SLIDING
MITER FENCE
FENCE
ADJUSTING
SCREW
SET SCREW
SOCKET HEAD
SCREW(S)
ASSEMBLY
Fig. 23
Loosen the fence adjusting screw, push the sliding fence
approx. 1 in. to the right to get past the set screw, then
lift to remove the sliding fence from the miter fence.
Using the blade wrench provided, loosen the socket head
screws that secure the miter fence to the miter table.
Rotate the miter fence left or right until the saw blade is
parallel with the square.
Retighten the screws securely and recheck the blade-to-
fence alignment.
Replace the sliding miter fences.
Your saw has several scale indicators. After squaring
adjustments have been made, it may be necessary to loosen
the indicator screws and reset them to zero.
See Figures
25 - 26.
SCALE
INDICATOR
INDICATOR
SCREW
MITER
SCALE
Fig. 25
SCALE
INDICATOR
INDICATOR
SCREW
BEVEL
SCALE
BEVEL
LOCK KNOB
Fig. 26