background image

972000-955
     9-02

RYOBI TECHNOLOGIES, INC.

1428 Pearman Dairy Road Anderson SC 29625

Post Office Box 1207 Anderson SC 29622-1207

Phone 1-800-525-2579

www.ryobitools.com

EXTENSION CORD CAUTION

When using a power tool at a considerable distance from a power
source, be sure to use an extension cord that has the capacity to
handle the current the tool will draw. An undersized cord will
cause a drop in line voltage, resulting in overheating and loss of
power. Use the chart to determine the minimum wire size
required in an extension cord. Only round jacketed cords should
be used.

When working with a tool outdoors, use an extension cord that is
designed for outside use. This is indicated by the letters "WA" on
the cord's jacket.

Before using any extension cord, inspect it for loose or exposed
wires and cut or worn insulation.

OPERATOR'S MANUAL
10 in. (254 mm) Miter Saw
Model TS1302

**Ampere rating

    (on tool data plate)

0-2.0

2.1-3.4

3.5-5.0

5.1-7.0

7.1-12.0 12.1-16.0

Cord Length

Wire Size (A.W.G.)

25'

16

16

16

16

14

14

50'

16

16

16

14

14

12

CAUTION: 

Keep the extension cord clear of the working

area. Position the cord so that it will not get caught on workpiece,
tools, or other obstructions while you are working with a power
tool.

**Used on 12 gauge - 20 amp circuit.

• SERVICE

Now that you have purchased your tool, should a need ever exist for repair parts or
service, simply contact your nearest Ryobi Authorized Service Center. Be sure to
provide all pertinent facts when you call or visit. Please call 1-800-525-2579 for your
nearest Ryobi Authorized Service Center. You can also check our web site at
www.ryobitools.com for a complete list of Authorized Service Centers.

• MODEL NO.

The model and serial numbers of your tool will be found on a plate attached to the motor
housing. Please record the serial number in the space provided below.

MODEL NUMBER

TS1302

SERIAL NUMBER

Summary of Contents for TS1302























Reviews: