Ryobi TLL-90, Owner'S Operating Manual

Page: 4 / 8

Do not subject the measuring tool to extreme temperatures
or variations in temperature. As an example, do not leave
it in vehicles for longer periods. In case of large variations
in temperature, allow the measuring tool to adjust to the
ambient temperature before putting it into operation.
Avoid heavy impact to or falling down of the measuring
tool. After severe exterior effects to the measuring tool, it is
recommended to carry out an accuracy check each time
before continuing to work.
THANK YOU FOR BUYING A RYOBI PRODUCT.
To ensure your safety and satisfaction, carefully read through
this OWNER’S MANUAL before using the product.
3
General Safety Rules
Caution!
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
AND INCLUDE THEM WITH THE MEASURING TOOL WHEN
GIVING IT TO A THIRD PARTY.
All instructions must be read and observed in order to work safely
with the measuring tool. Never make warning signs on the
measuring tool unrecognizable.
The use of other operating or adjusting equipment or the
application of other processing methods than those mentioned here
can lead to dangerous radiation exposure.
INSERTING/REPLACING BATTERIES (Fig. 1)
INITIAL OPERATION
APPLICATIONS
DESCRIPTION
SPECIFICATIONS
Using alkaline batteries is recommended for operation of the
measuring tool.
OPERATION
The measuring tool is provided with a warning label.
If the text of the warning label is not in your national language,
stick the provided warning label in your national language over
it before operating for the first time.
Do not operate the measuring tool in explosive
environments, such as in the presence of flammable
liquids, gases or dusts. Sparks can be created in the
measuring tool which may ignite the dust or fumes.
If laser radiation strikes your eye, you must deliberately close
your eyes and immediately turn your head away from the
beam.
The measuring tool is intended for horizontal and diagonal
alignment of tiles and laminate flooring panels.
The measuring tool is suitable for operation exclusively in
enclosed work sites.
Working range …………..….....................……………………. 7m
Laser accuracy …………….............…........………… ±0.5mm/m
Operating temperature ……..................……………. 0 °C~40 °C
Laser class …………………...................……………………….. 2
Laser type ………………..................………….… 635nm, <1mW
Batteries ………………..................……....… 2 x 1.5 V LR6 (AA)
Estimated battery life ...................……………… approx. <15hrs.
(use alk. AAA)
Net weight ……....................………………………………. 0.11kg
Do not allow children to use the laser measuring tool
without supervision. They could unintentionally blind other
persons or themselves.
Do not use the laser viewing glasses as safety goggles or
in traffic. The laser viewing glasses are used for improved
visualisation of the laser beam, but they do not protect against
laser radiation.
Have the measuring tool repaired only through qualified
specialists using original spare parts.
This ensures that the
safety of the measuring tool is maintained.
Do not make any modifications to the laser equipment.
Do not direct the laser beam at persons or animals
and do not stare into the direct or reflected laser
beam yourself, not even from a distance. You could
blind somebody, cause accidents or damage your
eyes.
1. Press the latch of the battery lid (8) to open the battery lid (9).
2. Insert 2 pcs new battery according to the polarity indicators in
the battery compartment. Be sure the polarity (+/-) is correct.
3. Close the battery lid and lock it securely in place.
When inserting, pay attention to the correct polarity according
to the representation on the inside of the battery compartment.
Always replace all batteries at the same time. Do not use
different brands or types of batteries together.
Do not leave the switched-on measuring tool unattended
and switch the measuring tool off after use. Other persons
could be blinded by the laser beam.
Protect the measuring tool against moisture and direct
sun light.
Remove the batteries/rechargeable batteries from the
measuring tool when not using it for longer periods.
When storing for longer periods, the batteries can corrode and
self-discharge.
1. On / Off switch
2. Laser aperture
3. Spirit level for vertical and horizontal alignment
4. 90° scale with 5° graduation
5. T-edge for alignment
6. Magnet
7. L-edge for alignment
8. Latch of battery lid
9. Battery lid
10. Base plate
11. Wall mount plate