background image

Page 4

The operation of any sander can result in foreign objects being thrown into your eyes, which
can result in severe eye damage.  Before beginning power tool operation, always wear safety
goggles or safety glasses with side shields and a full face shield when needed. We
recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses
with side shields. Always wear eye protection which is marked to comply with ANSI Z87.1.

FEATURES

Your  sander is suitable for sanding with coarse, medium, and fine grit sandpaper. It will produce a fine scratch free finish when
used to sand with the grain on wood surfaces. It has been designed so that flush corner sanding on three sides of the sander
is possible.

Your sander has a comfortable palm grip handle that provides maximum one-hand control and comfort, plus it reduces operator
fatique during continuous sanding operations.

Your sander has quick action paper clamps. This makes changing or replacing sandpaper fast and easy.

Your sander also has a built in dust collection that collects dust through punched holes in the sandpaper and cushion. 

See

Figure 1.

Before attempting to use your sander, familiarize yourself with all operating features and safety requirements.

SWITCH

This tool is equipped with a simple switch control. To turn your sander "ON", depress the switch button as shown in Figure 1.
Depress the switch button in the opposite direction to turn your sander "OFF".

ELECTRICAL CONNECTION

Your sander has a precision built electric motor. It should be connected to a power supply that is 120 volts, 60 Hz, AC only
(normal household current).  
Do not operate this tool on direct current (DC). A voltage drop of more than 10 percent will cause
a loss of power and overheating. If your tool does not operate when plugged into an outlet, double-check the power supply.

WARNING: IF ANY PARTS ARE MISSING DO NOT OPERATE YOUR SANDER UNTIL THE MISSING
PARTS ARE REPLACED. FAILURE TO DO SO COULD RESULT IN POSSIBLE SERIOUS PERSONAL
INJURY.

WARNING:

WARNING:  DO NOT ALLOW FAMILIARITY WITH YOUR SANDER TO MAKE YOU CARELESS.  REMEMBER
THAT A CARELESS FRACTION OF A SECOND IS SUFFICIENT TO INFLICT SEVERE INJURY.

PAPER PUNCH

Fig. 1

TAB

LEVER

CUSHION

SWITCH

ON

OFF

SWITCH

PAPER CLAMP

PLATEN

DUST BAG

Summary of Contents for S605D8











Reviews: