background image

5

SYMBOLS

Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta-
tion of these symbols will allow you to operate the tool better and safer.

Read The Operator’s Manual

Safety Alert 

SYMBOL 

NAME 

DESIGNATION/EXPLANATION

Voltage

Current

Frequency (cycles per second)

Power

Time

Type of current

Type or a characteristic of current

Rotational speed, at no load

Double-insulated construction

Revolutions, strokes, surface speed, orbits etc., per minute

Do not expose to rain or use in damp locations.

To  reduce  the  risk  of  injury,  user  must  read  and  understand 
operator’s manual before using this product.

Eye Protection

Always wear safety goggles or safety glasses with side shields 
and a full face shield when operating this product.

Precautions that involve your safety.

Wet Conditions Alert

.../min

Per Minute

Class II Construction

no

No Load Speed

Direct Current

Alternating Current

min

Minutes

W

Watt

Hz

Hertz

A

Amperes

V

Volts

Always  wear  nonslip,  heavy-duty  protective  gloves  when 
operating this product.

Wear Gloves

Wear Safety Footwear

Always wear nonslip safety footwear when operating this product.

Always keep bystanders at least 10 ft. (3 m) away.

Keep Bystanders Away

10' 3m

Keep Hands Away

Always keep hands away from the wedge and the ram.

Summary of Contents for RY49701

















Reviews: