background image

11

WARNING: 

Do  not  allow  familiarity  with  tools  to  make  you  care-
less. Remember that a careless fraction of a second is 
sufficient to inflict serious injury.

WARNING: 

Always wear safety goggles or safety glasses with side 
shields when operating tools. Failure to do so could re-
sult in objects being thrown into your eyes, resulting in 
possible serious injury.

WARNING:

Do not use any attachments or accessories not recom-
mended by the manufacturer of this tool. The use of at-
tachments or accessories not recommended can result 
in serious personal injury.

WARNING: 

Do not allow hands, feet, or any other part of the body or 
clothing near the rotating tines or any other moving part. 
The tines begin to rotate forward once the switch trigger 
is depressed. The tines continue to rotate until the switch 
trigger is released. Failure to avoid contact could cause 
serious personal injury.

ASSEMBLY

ADDING SAND

See Figure 6.

The cultivator is equipped with a Just Add Sand

 weight 

system, which improves the stability of the unit during op-
eration. The added weight of the sand also helps you work 
with less effort and vibration.
To add sand:

  Lift the lid of the Just Add Sand

 tank and remove.

  Pour dry sand into the tank. The tank will hold approxi-

mately 13 pounds of sand.

 

NOTE:  Be careful not to pour sand into or onto the motor 
housing.

  Replace Just Add Sand

 lid.

OPERATION

APPLICATIONS

  Breaking up garden soil to prepare seed bed for planting

  Shallow cultivating to remove weeds 

STARTING/STOPPING THE  
CULTIVATOR

See Figures 7 - 8.

  Plug the cultivator into an approved outdoor extension 

cord.

  Route  the  extension  cord  through  the  extension  cord 

retainer rings.

JUST ADD SAND

™ 

LID

Fig. 7

Fig. 6

RETAINER 

RINGS

EXTENSION 

CORD

PLUG

CONNECTOR

Summary of Contents for RY46501B



















Reviews: