Ryobi RY18PW22A, Manual

Page: 4 / 20

4
Original Instructions
away from corrosive agents, such as garden
chemicals and de-icing salts. Do not store
the product outdoors.
■ For transportation in a vehicle, secure the
product against movement or falling to
prevent injury to persons or damage to the
product.
WARNING! Store the product indoors only.
Storing in an area with temperature below 0°
will damage the product.
TRANSPORTING LITHIUM BATTERIES
Transport the battery pack in accordance with
local and national provisions and regulations.
Follow all special requirements on packaging
and labelling when transporting batteries by a
third party. Ensure that no batteries can come
in contact with other batteries or conductive
materials while in transport by protecting
exposed connectors with insulating, non-
conductive caps or tape. Do not transport
batteries that are cracked or leaking. Check
with the forwarding company for further advice.
MAINTENANCE
Use only original manufacturer’s replacement
parts, accessories, and attachments. Failure to
do so can cause possible injury, can contribute
to poor performance, and may void your
warranty.
Servicing requires extreme care and
knowledge and should be performed only by a
qualified service technician. Have the product
serviced by an authorised service centre only.
When servicing, use only original replacement
parts.
■ Stop the product, remove the battery
pack, and allow the product to cool down.
Disconnect the product from the water
supply:
● before cleaning the product
● before maintaining the product
● before replacing spare parts
■ You may make adjustments or repairs
described in this manual. For other repairs,
contact an authorised service centre.
■ Regularly inspect and maintain the product
for safe operation. Ensure that the battery
compartment is properly assembled, tightly
closed, and frequently check for damages.
Any part that is damaged should be properly
repaired or replaced by an authorised
service centre.
■ If the product is to be stored unused for
a long period, the batteries should be
removed.
KNOW YOUR PRODUCT
See page 7.
1. Release button
2. Power washer housing
3. Lock-out button
4. Latch
5. Handle grip
6. Switch trigger
7. Battery compartment
8. Water inlet
9. Extension wand
10. Operator's manual
11. 3-in-1 nozzle
12. Release button
13. Quick connector
14. Siphon hose
15. Floater
16. Filter
17. Battery pack (sold separately)
18. Charger (sold separately)
19. Detergent
20. Multipurpose Brush
21. Detergent Bottle
SAFETY DEVICES
■ Lock-out button
– The lock-out button locks the switch
trigger and prevents unintentional
opening of the high-pressure jet.
SYMBOLS ON THE PRODUCT
Warning
To reduce the risk of injury,
read and understand the
operator’s manual before
using the product.
Wear eye and hearing
protection.
To reduce the risk of injury
from high-pressure injection,
do not direct spray at persons
or animals.
Kickback. To reduce the risk of
injury from kickback, hold the
trigger handle securely with
both hands when the product
is on.