background image

3

 

WARNING:

Read and understand all instructions. 

Failure to follow 

all instructions listed below may result in electric shock, 
fire and/or carbon monoxide poisoning which will cause 
death or serious personal injury.

  Do not allow children or untrained individuals to use this 

unit.

  Never start or run the engine inside a closed area; breath-

ing exhaust fumes can kill.

  Wear eye protection which is marked to comply with ANSI 

Z87.1 as well as hearing protection when operating this 
equipment.

  Keep all bystanders, children, and pets at least 50 feet 

(15 m) away.

  Wear heavy long pants, boots, and gloves. Do not wear 

loose fitting clothing, short pants, jewelry of any kind, or 
go barefoot.

  To reduce the risk of injury associated with objects being 

drawn  into  rotating  parts,  do  not  wear  loose  clothing, 
scarves, neck chains, and the like. Secure long hair so it 
is above shoulder level to prevent entanglement in any 
rotating parts.

  Do not operate this unit when you are tired, ill, or under 

the influence of alcohol, drugs, or medication.

  Do not operate in poor lighting.

  Keep all parts of your body away from any moving parts 

and all hot surfaces of the unit.

  Wear a face filter mask in dusty conditions to reduce the 

risk of injury associated with the inhalation of dust.

  Check the work area before each use. Remove all objects 

such as rocks, broken glass, nails, wire, or string which 
can be thrown or become entangled in the machine.

GENERAL SAFETY RULES

 

Keep firm footing and balance. Do not overreach. Over-
reaching can result in loss of balance or exposure to hot 
surfaces.

 

Never operate the unit without a spark arrestor screen; 
this screen is located inside the muffler.

  Product users on United States Forest Service land, and 

in some states, must comply with fire prevention regu-
lations. This product is equipped with a spark arrestor; 
however, other user requirements may apply. Check with 
the federal, state, or local authorities in your area.

  Before storing, allow the engine to cool.

  Use only Ryobi replacement parts and accessories. Fail-

ure to do so may cause poor performance or possible 
injury.

  Maintain  the  unit  per  maintenance  instructions  in  this 

operator’s manual.

  Inspect the unit before each use for loose fasteners, fuel 

leaks, etc. Replace damaged parts.

SERVICE

 

Before  cleaning,  repairing,  or  inspecting,  shut  off  the 
engine and make certain all moving parts have stopped. 
Disconnect the spark plug wire, and keep the wire away 
from the plug to prevent starting. 

 

Service on the blower must be performed by qualified 
repair personnel only. Service or maintenance performed 
by unqualified personnel could result in injury to the user 
or damage to the product. 

 

Use only identical replacement parts when servicing the 
blower. Use of unauthorized parts may create a risk of 
serious injury to the user, or damage to the product.

Summary of Contents for RY08574





















Reviews: