Ryobi RY08544 Operator'S Manual Download Page 4

4

  Always hold the blower in your right hand. Refer to the 

Operation

 instructions later in this manual for additional 

information.

  To reduce the risk of hearing loss associated with sound 

level(s), hearing protection is required.

  To reduce the risk of injury associated with contacting  

rotating  parts,  stop  the  engine  before  installing  or  
removing attachments. Do not operate without guard(s) 
in  place.  Always  disconnect  the  spark  plug  before  
performing  maintenance  or  accessing  any  movable 
parts.

 

Do not point the blower nozzle in the direction of people 
or pets.

  Never run the unit without the blower tubes installed.

  Never place objects inside the blower tubes.

  Use only as directed in this operator’s manual.

  Do not operate vacuum without vacuum bag installed; 

flying  debris  could  cause  serious  injury.  Always  close 
vacuum bag completely before operating.

  Rotating impeller blades can cause severe injury. Stop 

the engine before opening the vacuum door or installing/ 
changing tubes. Do not put hands or any other object into 
the vacuum tubes while they are installed on the unit.

  Never run the unit without the proper equipment attached. 

When used as a blower, always install the blower tubes. 
When used as a vacuum, always install the vacuum tubes 
and vacuum bag. Make sure the vacuum bag is completely 
zipped when the unit is running to avoid flying debris.

  Avoid  situations  that  could  catch  the  vacuum  bag  on 

fire. Do not operate near an open flame. Do not vacuum 
warm ash from fireplaces, barbeque pits, brush piles, etc. 
Do not vacuum discarded cigars or cigarettes unless the 
cinders are completely cool.

SPECIFIC SAFETY RULES

REFUELING

 

Fuel is highly flammable. Take precautions when using 
to reduce the chance of serious personal injury.

 

Store fuel in a cool, well-ventilated area, safely away from 
spark and/or flame-producing equipment.

 

Store  fuel  in  containers  specifically  designed  for  this 
purpose.

 

Only refuel outdoors and do not smoke while refueling.

 

Add fuel before starting the engine. Never remove the cap 
of the fuel tank or add fuel while the engine is running or 
when the engine is hot.

 

Do not smoke while handling fuel.

  Mix and store fuel in a container approved for gasoline.

  Mix fuel outdoors where there are no sparks or flames.

  Loosen fuel cap slowly to release pressure and to keep 

fuel from escaping around the cap.

  Tighten the fuel cap securely after refueling.

  Wipe spilled fuel from the unit. Move 30 feet away from 

refueling site before starting engine.

  Never attempt to burn off spilled fuel under any circum-

stances.

  To reduce the risk of fire and burn injury, handle fuel with 

care. It is highly flammable.

 

If fuel is spilled, do not attempt to start the engine but 
move the machine away from the area of spillage and 
avoid  creating  any  source  of  ignition  until  fuel  vapors 
have dissipated.

 

Replace all fuel tank and container caps securely.

  Empty fuel tank and restrain the unit from moving before 

transporting in a vehicle.

 

When draining the fuel tank, use an approved fuel storage 
container in a well-ventilated area.

  Select bare ground, stop engine, and allow to cool before 

refueling.

  Save these instructions. Refer to them frequently and use 

them to instruct others who may use this tool. If you loan 
someone this tool, loan them these instructions also.

Summary of Contents for RY08544





















Reviews: