11
1
6
2
7
8
3
9
4
START
10
11
GETTING STARTED
GETTING STARTED
GETTING STARTED
GETTING STARTED
Wear full eye and ear protection, substantial footwear, and
long trousers at all times while operating the product. Do
not operate the product when barefoot or wearing open
sandals.
Swing one leg up.
Note:
Make sure that the product is
secured so that it does not tip over.
Insert the wheel shaft.
Swing the other leg up. Make sure that the wheel shaft
goes through the hole in the leg.
Note:
Adjust the shaving plate before use and during extended use
:
With the product turned on, turn the shaving plate
adjusting knob clockwise until you hear metal on metal contact or see fine aluminum shavings at the bottom of the
collection bin. After 30 seconds, turn the knob counterclockwise until the shaving plate has a gap of 1 mm from the blades.
1.
Insert the flat washer onto the wheel shaft.
2.
Insert the shaft sleeve onto the wheel shaft.
3.
Insert the wheel onto the
shaft sleeve.
4.
Insert the lock nut onto the wheel shaft.
5.
Tighten the nut using the wheel wrench.
6.
Insert the flat washer
onto the wheel shaft.
7.
Insert the shaft sleeve onto the wheel shaft.
8.
Insert the wheel onto the shaft sleeve.
9.
Insert the
lock nut onto the wheel shaft.
10.
Tighten the nut using the wheel wrench.
Turn the product on its legs.
Insert the collection bin.
Pull up the safety switch.
Note:
The product only functions
only if the safety switch is engaged.
Connect the product to a power outlet.
1
2
3
4
5
6
7
8
9
10
Press the start switch.
Start shredding.
5
Summary of Contents for RSH2445S
