TROUBLESHOOTING
Problem
Possible causes
Solution
Fluctuating
pressure
Pump sucking air
Bring the product to an authorised service
centre for service or repair.
Valves dirty, worn out or
stuck
Bring the product to an authorised service
centre for service or repair.
Pump seals worn out
Clean and replace or refer to local distributor.
Product stops
Thermal sensor activated Leave the cleaner for 15 minutes to cool down.
Nozzle partially blocked
Clean the nozzle.
Product
pulsating
Air in inlet hose/pump
Allow the product to run with open trigger until
regular working pressure resumes.
Inadequate supply of
mains water
Check that the water supply corresponds to
the specifications required (see model tag).
Avoid using long, thin hoses.
Nozzle partially blocked
Clean the nozzle.
Water filter blocked
Clean the filter.
Hose kinked
Straighten out hose.
Product starts,
but no water
comes out
Pump/hoses or accessory
frozen
Wait for pump/hoses or accessory to thaw.
No water supply
Connect the water inlet port to a water supply.
Water filter blocked
Clean the filter.
Nozzle blocked
Clean the nozzle.
No detergent
Nozzle adjusted to high
pressure
Adjust to low pressure.
Summary of Contents for RPW130XRB
