5
ENGLISH
SPECIFICaTIONS
Voltage :....................................................220-240V/50Hz
Power : ................................................................... 400 W
Cutting Capacity : .................................................. 17 mm
Blade Length : ......................................................400 mm
Blade Speed : .................................................. 1700 min
-1
Weight : ...................................................................4.1 kg
Sound Pressure Level : ...................................... 87 dB(A)
Sound Power Level :............................................97 dB(A)
Vibration : ...........................................................1.36 m/s²
DESCRIPTION
Fig.1
1. Blade Cover
2. Blades
3. Four-Position Pivoting Head
4. Telescopic Pole
5. Lock-Off Button
6. Rear Handle
7. Switch Trigger
8. Cord Retainer
Fig.2
9. Telescopic Pole
10. Cord Protector
11. Cord
12. Threaded Collar
13. Trimmer Head
14. Lock Hole
15. Egg-Shaped Pole
16. Threaded Base
Fig.4
17. Pivot Button
18. Notches
aSSEMBLY
UNPaCKING
This product requires assembly.
n
Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing
list are included.
n
Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
n
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
n
If any parts are damaged or missing, please contact
Customer Service.
PaCKING LIST
Pole Hedge Trimmer
Operator’s Manual
WaRNING:
If any parts are damaged or missing, do not
operate this product until the parts are replaced.
Failure to heed this warning could result in
serious personal injury.
WaRNING:
Do not attempt to modify this product or create
accessories not recommended for use with this
product. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WaRNING:
Do not connect to power supply until assembly is
complete. Failure to comply could result in
accidental starting and possible serious personal
injury.
aSSEMBLING THE TOOL
See Figure 2.
Before using the pole hedge trimmer, a one-time
assembly is required.
n
The telescopic pole and trimmer head come
unassembled. Remove from packaging and extend
the telescopic pole to its longest operating position as
shown in Figure 2.
n
Unscrew the threaded collar from trimmer head base
and pull back over the cord to the extended telescopic
pole as shown.
n
Remove and discard both rubber cord protectors from
the telescopic pole.
n
Insert the telescopic pole into the trimmer head
threaded base until the lock holes click into place. The
tubes are egg-shaped and will only fit one way. The
threaded base will spread open during assembly.
NOTE:
You may need to slightly rotate pole from side
to side until it locks into place.
n
Lower the threaded collar onto the threaded base and
rotate clockwise to secure.
WaRNING:
Failure to lock telescopic pole as directed above
could result in serious injury or death.