![background image](http://html1.mh-extra.com/html/ryobi/rps1201/rps1201_original-instructions-manual_1506312004.webp)
Safety
2
are less likely to bind and are easier to control.
g)
Use the power tool, accessories and tool bits
etc, in accordance with these instructions,
taking into account the working conditions and
the work to be performed.
Use of the power tool
for operations different from those intended could
result in a hazardous situation.
5) BATTERY TOOL USE AND CARE
a)
Recharge only with the charger specified by
the manufacturer.
A charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack.
b)
Use power tools only with specifically
designated battery packs.
Use of any other
battery packs may create a risk of injury and fire.
c)
When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects
that can make a connection from one terminal
to another.
Shorting the battery terminals together
may cause burns or a fire.
d)
Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medical
help.
Liquid ejected from the battery may cause
irritation or burns.
6) SERVICE
a)
Have your power tool serviced by a qualified
repair person using only identical replacement
parts.
This will ensure that the safety of the power
tool is maintained.
SPECIAL SAFETY RULES
WARNING
The product is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the product by a person responsible
for their safety.
Children should be supervised to ensure that they do not
play with the product.
■
Always wear safety goggles and a dust mask when
sanding, especially sanding overhead.
■
A suitable breathing respirator must be worn while
sanding lead paint, some woods and metal to avoid
breathing the harmful/toxic dust or air.
■
Do not throw sanding dust on an open fire
because
materials in fine particle form may be explosive.
■
The machine is not suitable for wet sanding.
■
Do not use sanding paper larger than needed.
Extra
paper extending beyond the sanding pad can also
cause serious lacerations.
■
When not in use, all tools should be disconnected from
power source.
■
Caution, fire hazard! Avoid overheating the object being
sanded as well as the sander. Always empty the dust
collector before taking breaks.
■
Protect the battery against heat (e.g., continuous
intense sunlight and fire), water, and moisture.
■
Properly dispose of dropped or damaged battery
immediately.
INTENDED USE
Dry sanding and polishing wood, filler, and coated surfaces.
MAINTENANCE
■
When servicing, use only identical replacement parts.
Use of any other parts may create a hazard or cause
product damage.
■
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types
of commercial solvents and may be damaged by their
use. Use clean cloths to remove dirt, dust, oil, grease,
etc.
■
Always wear safety goggles or safety glasses with side
shields during power product operation or when blowing
dust. If operation is dusty, also wear a dust mask.
■
To avoid serious personal injury, always remove
the battery pack from the product when cleaning or
performing any maintenance.
■
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken or
destroy plastic which may result in serious personal
injury.
■
Only the parts shown on the parts list are intended to
be repaired or replaced by the customer. All other parts
should be replaced at an authorized service center.
LED INDICATORS
Battery charge
LED colour
66% - 100%
Green + Red
33% - 66%
Red
< 33%
Red
NOTE:
If the red LED indicator is flashing, it means the
battery power is low. The battery needs to be recharged.