background image

ENGLISH

GENERAL SAFETY RULES

WARNING

When using electric gardening appliances, basic 

safety precautions should always be followed to

 

  reduce the risk of fire, electric shock and personal 

 

injury, including the following:

This appliance is not intended for use by persons 

(including children) who have limited understanding 

or lack of experience and control, unless they have 

been given supervision or instruction concerning the 

use of the appliance by a person responsible for their 

safety.

 Children should be supervised to ensure that they do 

not play with the appliance.

ELECTRICAL SAFETY INSTRUCTIONS

Use transport guard during transport and storage.

The machine must be cleaned and maintained before 

storage.

Secure the unit during transport to prevent loss of oil, 

injury or damage.

 Local regulations may restrict the age of the operator.

Do not use the machine in any position that causes 

any part to come within 15m of overhead electrical 

lines.

The operator should wear slip-resistant foot 

protection as well as close fitting clothes, the use of 

PPE and the need for adequate training, with PPE 

including of hearing protection, eye protection, and 

head protection .

Do not use the unit if you are tired, ill or under 

influence of alcohol or other drugs

Hazards which may be encountered when using 

the pruner and avoid them when carrying out typical 

tasks, and keep bystanders away while operating the 

machine.

 Beware of falling branches or those rebound after 

hitting the ground, remove these branches in sections 

and not operate in the dangerous positions.

Keep a firm footing and balance during operation, 

including the need to use the harness provided.

ADDITIONAL SAFETY RULES

Never allow children or people unfamiliar with these 

instructions to use the appliance.

 Only use in daylight or in good artificial light.

 The appliance should be inspected and maintained 

regularly. Repairs should be carried out only by an 

authorised repairer.

 For additional protection the installation of a residual 

current device (RCD) with a rated residual operating 

current not exceeding 30 mA is advisable.

 Remove plug immediately from main if the cord is 

damaged or cut.

 After use, disconnect the machine from the mains 

and check for damage.

 When not in use store the machine out of the reach of 

children.

 Mains powered pruner should only be repaired by an 

authorised repairer. 

 Do not expose to moisture. 

 Before use check the supply and extension cord for 

signs of damage or ageing.

 If the cord becomes damaged during use, disconnect 

the cord immediately from the supply. 

DO NOT TOUCH THE CORD BEFORE 

DISCONNECTING THE SUPPLY.

 Keep cords away from cutting elements.

WARNING! Cutting elements continue to rotate after 

motor is switched off.

Summary of Contents for RPP720G












Reviews: