![background image](http://html1.mh-extra.com/html/ryobi/rphd43o/rphd43o_operators-manual_1505078010.webp)
8
Never operate in a horizontal angle. The post hole digger should only be operated with the auger
at a 90° angle to the ground.
Always keep the handles dry and clean.
Before starting to drill make sure the bit is not obstructed.
Always work in a
firm-footed and safe position.
Never touch the auger bit or carry out maintenance with the engine running.
Grip the post hole digger firmly with both hands and keep all parts of the body away from the
auger bit and muf
fler.
Never attempt to carry out servicing or repairs that are not part of the routine maintenance.
For other repairs, have the post hole digger serviced by an authorised repairer.
Store the post hole digger off the ground in a vertical position in a dry place and with fuel tank
empty.
If the auger bit jams, stop the engine immediately.
SYMBOLS
IMPORTANT
:
Some of the following symbols may be used in this manual. Please study them and
learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better
and safer.
SYMBOL
Safety alert symbol
Indicates danger, warning or caution. It means attention!!!
Your safety is involved.
Read your
Operator’s Manual
Your manual contains special messages to bring attention
to potential safety concerns as well as operating and
servicing information. Please read all the information
carefully to ensure satisfaction and safe use.
Eye and hearing
protection
Wear eye and hearing protection when operating this
equipment.
Keep bystanders
away
Keep all bystanders at least 3m away.
Boots
Wear non-slip safety footwear when using this tool.
Minimum
3m
NAME
EXPLANATION
Always check for fuel leaks before operating the post hole digger. Never operate if a fuel leak
is present.
Regulatory
Compliance
Mark (RCM)
This product meets applicable regulatory requirements
Summary of Contents for RPHD43O
Page 1: ...OPERATOR S MANUAL POST HOLE DIGGER RPHD43...
Page 23: ......