Ryobi RPH361800, Manual

Page: 6 / 20

6
Original Instructions
ERROR MESSAGE NOTIFICATIONS
Error Message Possible cause Solution
High temperature
or
Low temperature
(when the battery
pack is installed for
charging)
The battery pack is outside
the acceptable charging
temperature range.
Allow the battery pack to reach the
acceptable charging temperature
range. The battery may need to
be removed from the port and
reinstalled to begin charging.
O U T P U T W AT T S
Incompatible battery
pack
(displays on the
specific battery pack
slot)
The installed battery pack
is not compatible with the
product.
Remove the incompatible battery
pack.
For a list of compatible battery
packs, refer to the "Compatible
battery packs and power output"
section.
O U T P U T W AT T S
Battery pack is low.
(displays on the
specific battery pack
slot)
The battery charge is low. Recharge the battery pack.
O U T P U T W AT T S
No battery pack in
slot.
(displays on the
specific battery pack
slot)
There is no battery pack
installed.
The battery pack is not
properly installed.
Remove and reinstall the battery
pack.
O U T P U T W AT T S
Battery fault
(displays on the
specific battery pack
slot)
There are protection features
triggered in the battery pack.
The communication between
the inverter and battery pack
fails during charging.
The battery pack is defective.
Wait until the protection feature
is disabled or when the LCD no
longer displays error message.
Use another battery pack.
O V E R LO A D E D
REMOVE LOAD
O U T P U T WAT T S
Overloaded
Remove load
The inverter output wattage
exceeds normal operating
range.
Press the reset button to reset the
AC output.
O V E R LO A D E D
PRESS RESET
O U T P U T WAT T S
Overloaded
Press reset
The inverter is overloaded. Press the reset button to reset the
AC output.