3
■
Turn off the product and remove the battery pack before
conducting any maintenance or cleaning work.
■
You may only make adjustments or repairs described
in this manual. For other repairs, contact an authorised
service centre.
■
For the replacement line, use only a nylon filament line
of the diameter described in the specifications table of
this manual.
■
After extending the new cutter line, always return the
product to its normal operating position before starting.
■
After each use, clean the product with a soft, dry cloth.
Any part that is damaged should be properly repaired or
replaced by an authorised service centre.
■
Check all nuts, bolts, and screws before each use and
at frequent intervals for proper tightness to ensure that
the product is in safe working condition. Any part that is
damaged should be properly repaired or replaced by an
authorised service centre.
■
Bring the product to an authorised service centre to
replace damaged or unreadable labels.
RESIDUAL RISKS
Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise during use, and
the operator should pay special attention to avoid the
following:
■
injury caused by vibration
–
Hold the product by the designated handles, and
restrict working time and exposure.
■
injury caused by exposure to noise
–
Wear hearing protection and limit exposure.
■
injury caused by flying debris
–
Wear eye protection at all times.
RISK REDUCTION
It has been reported that vibrations from handheld tools
may contribute to a condition called Raynaud’s Syndrome.
Symptoms may include tingling, numbness, and blanching
of the fingers, usually apparent upon exposure to cold.
Hereditary factors, exposure to cold and dampness, diet,
smoking, and work practices are all thought to contribute to
the development of these symptoms. There are measures
that can be taken by the operator to possibly reduce the
effects of vibration:
■
Keep your body warm in cold weather. When operating
the product, wear gloves to keep the hands and wrists
warm. It is reported that cold weather is a major factor
contributing to Raynaud’s Syndrome.
■
After each period of operation, exercise to increase
blood circulation.
■
Take frequent work breaks. Limit the amount of
exposure per day.
If you experience any of the symptoms of this condition,
immediately discontinue use and see your physician.
WARNING
Injuries may be caused, or aggravated, by prolonged
use of a tool. When using any tool for prolonged periods,
ensure that you take regular breaks.
WHAT’S IN THE BOX
See pages 5–6.
■
Lower boom with string head assembly × 1
■
Power head with upper boom assembly × 1
■
Front handle × 1
■
Grass deflector × 1
■
Holding pin × 1
■
Charger (RLT36X4BL only) × 1
■
Battery (RLT36X4BL only) × 1
■
Manual × 1
NOTE:
For RLT36BL, the battery and charger are sold
separately.
SYMBOLS ON THE PRODUCT
Read and understand all instructions
before operating the product. Follow all
warnings and safety instructions.
Wear eye protection.
Wear ear protection.
Wear non-slip safety footwear when
using the product.
Do not use metal blade(s) on the
product.
Do not expose the product to rain or
damp condition.
Remove the battery pack before starting
any work on the product.
Beware of thrown or flying objects.
Keep all bystanders, especially children
and pets, at least 15 m away from the
operating area.
111
103
Guaranteed sound power level
Keep hands away from the cut-off blade.
