background image

4

English

SYMBOLS

Important: 

Some of the following symbols may be used on this product. Please study them and learn their meaning. 

Proper interpretation of these symbols will allow you to operate the product better and safer.

SYMBOLS

NAME

EXPLANATION

Safety Alert

Precautions that involve your safety.

 

Read The Operator’s Manual

To reduce the risk of injury, user must read and understand 

operator’s manual before using this product.

Eye Protection

Always wear safety goggles or safety glasses with side 

shields and, as necessary, a full face shield when operating 

this product.

Keep Bystanders Away

Keep all bystanders at least 15 m away.

Belt Entanglement Hazard

Keep all body parts and clothing clear of any belts or 

other moving parts.

Moving Parts

To  avoid  injury,  stay  away  from  moving  parts  at  all 

times.

 

Keep Hands and Feet Away

Danger. Keep hands and feet away.

Ricochet

Thrown  objects  can  ricochet  and  result  in  personal 

injury or property damage.

 

Hot Surface

To  reduce  the  risk  of  injury  or  damage,  avoid  contact 

with any hot surface.

No Smoking

Do  not  smoke  and  stay  away  from  open  flames  and 

sparks when filling fuel tank or when handling fuel.

Petrol

Use unleaded gasoline intended for motor vehicle use 

with an octane rating of 91 ([R+M]/2) or higher.

Oil

Use SAE 30 or 10W30 API-SJ weight oil.

Throttle lever to maximum

Throttle lever to minimum

Loosen fuel cap slowly to release pressure and to keep 

petrol from escaping around the cap.

Carefully pour petorl into the tank.

 

/

 

Push the primer bulb 3 times.

Summary of Contents for RLM4619SME














Reviews: