background image

5

INTENDED USE

This product is intended for domestic lawn mowing. The 

cutting blade should rotate approximately parallel to the 

ground over which it is being wheeled. All four wheels 

should touch the ground while mowing. It is a pedestrian 

controlled walk behind mower.
The mower should never be operated with the wheels off 

the ground, it should not be pulled or ridden on. It should 

not be used to cut anything other than domestic grass 

lawns.

RESIDUAL RISK

Even when the product is used as prescribed, it is still 

impossible to completely eliminate certain residual risk 

factors. The following hazards may arise in use and 

the operator should pay special attention to avoid the 

following: 

 

■ Injury caused by vibration. Always use the right tool for 

the job, use designated handles and restrict working 

time and exposure. 

 

■ Exposure to noise can cause hearing injury. Wear ear 

protection and limit exposure.

 

■ Contact with blades

 

■ Injury from thrown objects

RISK REDUCTION

It has been reported that vibrations from hand-held tools 

may contribute to a condition called Raynaud’s Syndrome 

in certain individuals. Symptoms may include tingling, 

numbness and blanching of the fingers, usually apparent 

upon exposure to cold. Hereditary factors, exposure to 

cold and dampness, diet, smoking and work practices are 

all thought to contribute to the development of the these 

symptoms. There are measures that can be taken by the 

operator to possibly reduce the effects of vibration:

 

■ Keep your body warm in cold weather. When operating 

the unit wear gloves to keep the hands and wrists 

warm. It is reported that cold weather is a major factor 

contributing to Raynaud’s Syndrome.

 

■ After each period of operation, exercise to increase 

blood circulation.

 

■ Take frequent work breaks. Limit the amount of 

exposure per day. 

If you experience any of the symptoms of this condition, 

immediately discontinue use and see your doctor about 

these symptoms.  

 WARNING

Injuries may be caused, or aggravated, by prolonged 

use of a tool.  When using any tool for prolonged 

periods, ensure you take regular breaks.

 WARNING

To avoid serious personal injury, do not attempt 

to use this product until you read thoroughly and 

understand completely the operator’s manual. If you 

do not understand the warnings and instructions in 

the operator’s manual, do not use this product. Call 

authorised service centre for assistance.

SPECIFICATIONS

Engine

190cc OHV

No-load speed

2,700/min. (RPM)

Torque@2,500rpm

11.2 Newton Metres (Nm)

8.2 Foot Pound (ft lb)

Cutting path

460 mm

Height adjustments

10 positions, 10 mm−75 mm

Wheel size

7” front, 8” rear

Grass bag capacity

50 litres

Sound power level

LwA 98.7 dB, K=3

Sound pressure level

LpA 86.6 dB, K=3

Vibration: Left handle

9.721 m/s

2

, K=1.5

Vibration: Right handle

6.744 m/s

2

, K=1.5

Guaranteed value

86 dB Pressure level (LpA) 

98 dB Power level (LwA)

Net weight

35.2 kg

Gross weight

39.4 kg

Oil capacity

0.6 l

Petrol tank capacity

0.95 l

DESCRIPTION

See figure 1.

1.  Primer bulb

2.  Oil cap/dipstick

3.  Fuel cap

4.  Starter grip

5.  Handle knob

6.  Air filter cover

7.  Throttle lever

8.  Grass catcher

9.  Height adjustment lever

10. Rear discharge door (see figure 3)

11. Spark plug boot

12. Rope guide knob

13. Mulching plug (see figure 3)

14. Fuel tap

Summary of Contents for RLM4619SMB

















Reviews: