![background image](http://html.mh-extra.com/html/ryobi/rlm36x41h50p/rlm36x41h50p_original-instructions-manual_1505194006.webp)
NOTE:
The product will not function if the
telescopic handle is not fully extended and
the two latches are not in the correct position.
POWER ASSIST LEVER
The product is equipped with a power assist
lever that activates the self-propel function.
Pressing the power assist lever down drives
the product forward without having the user
push it.
NOTE:
The power assist feature functions
normally when the product is used on a
fl
at
surface. The user needs to push the product
forward when using the product on slopes or
uneven surfaces because the power assist
function will be limited and may cause the
wheel to slip.
GENERAL MOWING TIPS
The run time of the battery depends on the
condition, length, and density of the grass.
Adjust the cutting height of the lawn mower to
suit the current condition of the lawn.
Grass
conditions
Suggested height
adjustment
Coverage
(maximum)
First pass
Succeeding
passes
Very thin / Dry 3
2
600 m
2
*
Thin / Dry
4
3
→
2
500 m
2
*
Medium /
Dense
5
4
→
3
400 m
2
*
* battery: BPL3650D
■
For best performance, always cut off one-
third or less of the total height of the grass.
■
When cutting long grass, reduce walking
speed to allow for more effective cutting
and a proper discharge of the clippings.
■
Do not cut wet grass; it will stick to the
underside of the deck and prevent proper
collection or discharge of grass clippings.
■
New or thick grass may require a higher
cutting height.
■
If you wish to collect the grass cuttings for
disposal, remove the mulching plug and fit
the grass catcher making sure the top flap
is properly closed. Empty the grass catcher
regularly; otherwise, the discharge chute
will become blocked with grass cuttings.
■
If you are making a light cut and wish for
the grass cuttings to remain on the lawn,
fit the mulching plug and close the top flap
to cover the discharge opening. It is not
necessary to fit the grass catcher in this
case.
■
The product is designed to operate and cut
most effectively when moving forwards.
■
A higher cutting height will extend the run
time of the battery.
TRANSPORTATION AND STORAGE
■
Stop the product, remove the isolator key
and the battery. Make sure that all moving
parts have come to a complete stop. Allow
the product to cool down before storing or
transporting.
■
Clean all foreign materials from the product.
Store the product in a cool, dry, and well-
ventilated place that is inaccessible to
children. Keep away from corrosive agents
such as garden chemicals and de-icing
salts. Do not store outdoors.
■
For transportation in vehicles, remove
isolator key and secure the product against
movement or falling to prevent injury to
persons or damage to the product.
WARNING
Use extreme caution when lifting or tilting the
product for maintenance, cleaning, storage,
or transportation, the blade is sharp, keep
all body parts away from the blade while it
is exposed.
MAINTENANCE
WARNING
Use only original manufacturer’s
replacement parts, accessories and
attachments. Failure to do so can
cause possible injury, contribute to poor
performance, and may void your warranty.
WARNING
Servicing requires extreme care and
knowledge and should be performed only by
a quali
fi
ed service technician. For service,
bring the product to an authorised service
centre for repair. When servicing, use only
original replacement parts.
4
| English
Summary of Contents for RLM36X41H50P
