Ryobi RLM36B46S1, Original Instructions Manual, Page: 6 / 28

4
not work, recharge the battery.
NOTE: The battery pack LED indicator does
not work if the battery protection feature has
caused the battery pack to stop powering the
product. Release the on/off trigger or remove
the battery pack from the product, and the
battery pack LED indicator will resume normal
function.
TELESCOPIC HANDLE
The product is equipped with a telescopic
handle that can be adjusted for storage and
operation. The telescopic handle must be fully
extended when setting up the product for use .
GENERAL MOWING TIPS
The run time of the battery depends on the
condition, length, and density of the grass.
Adjust the cutting height of the lawn mower to
suit the current condition of the lawn.
Grass
conditions
Suggested height
adjustment
Coverage
(maximum)
First
pass
Succeeding
passes
Thin / Dry 4 3 → 2
620 m
2
Medium /
Dense
5 4 → 3
400 m
2
* battery: BPL3650D2
■ For best performance, always cut off one-
third or less of the total height of the grass.
■ When cutting long grass, reduce walking
speed to allow for more effective cutting
and proper discharge of the clippings.
■ Do not cut wet grass. Wet grass sticks to
the underside of the deck and prevents
proper collection or discharge of grass
clippings.
■ New or thick grass may require a higher
cutting height.
■ To collect the grass cuttings for disposal,
remove the mulching plug and fit the
grass catcher making sure the rear door is
properly closed. Empty the grass catcher
regularly. Otherwise, the discharge chute
becomes blocked with grass cuttings.
■ If you are making a light cut and wish for
the grass cuttings to remain on the lawn,
fit the mulching plug and close the rear
door to cover the discharge opening. It is
not necessary to fit the grass catcher in this
case.
■ The product is designed to operate and cut
most effectively when moving forwards.
■ A higher cutting height extends the run
time of the battery.
TRANSPORTATION AND STORAGE
■ Turn off the product, and remove the
isolator key and the battery pack. Make
sure that all moving parts have come to a
complete stop. Allow the product to cool
down before storing or transporting.
■ Clean all foreign materials from the product.
Store the product in a cool, dry, and well-
ventilated place that is inaccessible to
children. Keep the product away from
corrosive agents such as garden chemicals
and de-icing salts. Do not store the product
outdoors.
■ For transportation in vehicles, remove the
isolator key and secure the product against
movement or falling to prevent injury to
persons or damage to the product.
WARNING
Use extreme caution when lifting or tilting
the product for maintenance, cleaning,
storage, or transportation. The blade is
sharp, keep all body parts away from the
blade while it is exposed.
TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with local
and national provisions and regulations.
Follow all special requirements on packaging
and labelling when transporting batteries by a
third party. Ensure that no batteries can come
in contact with other batteries or conductive
materials while in transport by protecting
exposed connectors with insulating, non-
conductive caps or tape. Do not transport
batteries that are cracked or leaking. Check
with the forwarding company for further
advice.