Avoid Exposure. Radiation is emitted from this aperture.
Complies with 21CFR parts 1040.10 & 1040.11
DANGER
LASER RADIATION : AVOID DIRECT EYE EXPOSURE
MAXIMUM OUTPUT: <1 mW • WAVELENGTH : 630-670nm • CLASS II LASER PRODUCT
RIT310
N197
2
2 in.
@20 in.
4 in.
@40 in.
100 mm
@ 1000 mm
50 mm
@ 500 mm
UNPACKING
This product has been shipped completely assembled.
Carefully remove the product and any accessories from the
box. Make sure that all items listed in the packing list are
included.
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
could result in serious personal injury.
Inspect the product carefully to make sure no breakage or
damage occurred during shipping.
Do not discard the packing material until you have carefully
inspected and satisfactorily operated the product.
If any parts are damaged or missing, please call
1300 361 505 for assistance.
PACKING LIST
Thermometer
Operator’s Manual
3x AAA Batteries
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Failure to heed this
warning could result in serious personal injury.
ASSEMBLY
OPERATION
OPERATION
WARNING:
Do not attempt to modify this product or create accessories
not recommended for use with this product. Any such
alteration or modification is misuse and could result in a
hazardous condition leading to possible serious personal
injury.
WARNING:
Do not allow familiarity with products to make you careless.
Remember that a careless fraction of a second is sufficient
to inflict serious injury.
WARNING:
Always remove battery pack from the product when you are
assembling parts, making adjustments, cleaning, or when
not in use
.
APPLICATIONS
Non-contact temperature measurement for electricians,
facility maintenance personnel and remodeling contrac-
tors
Check the temperature of air vents and other HVAC ap-
plications
Check temperatures of exterior/interior surfaces
Automotive applications
INSTALLING/REMOVING BATTERY PACK
See Figure 2, page 2
.
To install the battery pack:
Unscrew the battery compartment cap.
NOTE:
Do not remove the gasket inside the cap.
Insert the battery pack in the direction shown. Make sure
the raised rib on the battery pack aligns with the groove
in the battery compartment.
Place the cap over the battery pack and push down
until the cap meets the threads at the end of the battery
compartment.
Screw the cap on securely.
To remove the battery pack:
Unscrew the cap. The battery pack will disconnect and
be easy to remove.
Do not attempt to use this product if the battery cap is not
securely closed.
TAKING TEMPERATURE READINGS
See Figure 3, page 2
.
Always remove the protective cover before taking a reading.
Replace the cover when you are finished taking readings or
before storing the thermometer.
A - LCD Display
B - RECORD button
C - PLAY button
D - Min/max button
E - ºC/ºF button
F - HOLD indicator
G - LASER indicator
H - LOG indicator
A - Laser beam
B - Target area
C - Trigger
Fig. 2
Fig. 4
Fig. 3
A - Battery compartment
B - Cell carrier
C - Battery cap
HOLD
25
.8
C
50
MIN
MAX
C/F
m
/m
ax
in
LOG
A
H
G
F
C
E
B
D
A - Trigger
B - Target measuring beam
C - Laser aperture
D - Protective cover
Fig. 1
A
D
B
C
B
A
C
B
DISTANCE TO SPOT RATIO (D:S)
A
C
D
S
