Ryobi RIG1000, Original Instructions Manual

Page: 12 / 24

Operation
9
Auto-idle switch
With the switch in the ON position, engine speed is
automatically lowered when loads are reduced, turned OFF
or disconnected. When appliances are turned ON or reconnected, the
engine returns to the proper speed to power the electrical load. ln the
OFF position, the smart throttle system does not operate.
Appliances with large start-up power demands may not allow the
engine to reach normal operating rpm when they are connected to
the generator. Turn the smart throttle switch to the OFF position and
connect the appliance to the generator. lf the engine still will not reach
normal operating speed, check that the appliance does not exceed the
rated load capacity of the generator.
AUTO
IDLE
Auto-idle
■ The smart throttle system is not effective for use with appliances
that require only momentary power. lf the tool or appliance will be
turned ON and OFF quickly, the smart throttle switch should be in
the OFF position.
■ When high electrical loads are connected simultaneously, turn
the Smart throttle switch to the OFF positlon to reduce voltage
fluctuation or shutdown.
■ ln DC operation, turn the Smart throttle switch to the OFF position.