Ryobi RHT25460RO, Original Instructions Manual

Page: 12 / 40

10
(50 : 1)
50 : 1 / 2%
1 2
9
GETTING STARTED
Use synthetic 2-stroke lubricant only. Do not use
automotive lubricant or 2-stroke outboard lubricant. Mix
2% synthetic 2-stroke lubricant into the petrol. This is a
50:1 ratio.
Set the choke lever to position.
Always wear safety goggles or safety glasses with side
shields when operating the product. Failure to do so could
result in objects being thrown into your eyes resulting in
possible serious injury. When handling the blade assembly,
wear non-slip, heavy-duty protective gloves. Wear non-
skid, protective footwear that will protect your feet
and
improve your footing on slippery surfaces.
<x
6
1
3
2
10
Hold and squeeze the rear handle, throttle trigger, and
throttle trigger lock. Pull the starter grip until the engine
starts. Do not pull the starter grip more than 6 times.