background image

6

GENERAL SAFETY RULES

SPECIFIC SAFETY RULES

WARNING

T h i s   a p p l i a n c e   c o m p l i e s   w i t h   t h e 

compulsory safety regulations for electric 

equipment. However, improper use can 

be harmful to people and property. Please 

read these operating instructions carefully 

and completely before switching the 

appliance  on.  Save  these  instructions. 

Refer to them frequently and use them to 

instruct others who may use this product. 

If you loan someone this tool, loan them 

these instructions also.

WARNING

The appliance is not intended for use by 

young children or infirm persons unless 

they have been adequately supervised by 

a responsible person to ensure that they 

can use the appliance safely.

Young children should be supervised 

to ensure that they do not play with the 

appliance.

WARNING

When using this garden shredder basic 

safety precautions, including the following, 

should be followed to reduce the risk of fire, 

electric shock and personal injury. Read all 

of these safety instructions carefully before 

operating this garden shredder. Make sure 

that you are familiar with the controls and 

the proper and safe use of the garden 

shredder.

 

This appliance is not intended for use by 

persons  (including  children)  with  reduced 

physical, sensory or mental capabilities, or lack 

of experience and knowledge, unless they have 

been given supervision or instruction concerning 

use of the appliance by a person responsible for 

their safety.

TRAINING

 

Become familiar with this user guide before 

attempting to operate this shredder.

 

■ Never allow children or people unfamiliar with 

these instructions to use the garden shredder. 

Local regulations may restrict the age of the 

operator.

 

The operator or user of this garden shredder is 

responsible for accidents or hazards occurring to 

other people or their property.

PREPARATION

 

■ Do not allow children to operate this equipment.

 

■ Do not operate this equipment in the vicinity of 

bystanders.

 

■ Wear ear protection and safety glasses at all 

times while operating the machine.

 

■ Avoid wearing clothing that is loose fitting or that 

has hanging cords or ties.

 

■ Only operate the machine in open space (e.g. 

not close to a wall or a fixed object) and on a 

firm, level surface.

 

■ Do  not  operate  the  machine  on  a  paved  or 

gravel surface where ejected material could 

cause injury.

 

■ It is recommended that the shredder should be 

used with a Residual Current Device (RCD) with 

a tripping current of no more than 30mA.

 

Before starting the machine, check that all 

screws, nuts, bolts, and other fasteners are 

properly secured and that guards and screens 

are in place. Replace damaged or unreadable 

labels.

 

■ Do not use this machine in wet, damp or raining 

conditions.

OPERATION

 

Before starting the machine, look into the feeding 

chamber to make certain that it is empty.

 

Keep your face and body away from the feed 

intake opening.

 

■ Do  not  allow  hands  or  any  other  part  of  the 

body or clothing inside the feeding chamber, 

discharge chute, or near any moving part.

 

■ Keep proper balance and footing all times. Do 

not overreach. Never stand at a higher level than 

the base of the machine when feeding material 

into it.

 

■ Always stand clear of the discharge zone when 

operating this machine.

 

■ When  feeding  material  into  the  machine  be 

extremely careful that pieces of metal, rocks, 

bottles, cans or other foreign objects are not 

included.

 

■ If the cutting mechanism strikes any foreign 

objects or if the machine should start making 

any unusual noise or vibration, shut off the 

power source and allow the machine to stop. 

Disconnect from supply and take the following 

steps:

 

● Inspect for damage.

 

Check and tighten any loose parts.

 

Have any damaged parts replaced or repaired 

with parts having equivalent specifications.

Summary of Contents for RGS1500R












Reviews: