Ryobi RGS-1240, Owner'S Operating Manual

Page: 5 / 8

THANK YOU FOR BUYING A RYOBI PRODUCT.
To ensure your safety and satisfaction, carefully read through
this OWNER’S MANUAL before using the product.
General Safety Rules
WARNING!
Read all instructions. Failure to follow all instructions listed
below may result in electric shock, fire and/or serious injury. The term
“power tool” in all of the warnings listed below refers to your mains
operated (corded) power tool or battery-operated (cordless) power
tool.
- 4 -
GENERAL SAFETY RULES
SPECIFIC SAFETY RULES
• Do not use this machine in wet, damp or raining conditions.
Training
•
Become familiar with this user guide before attempting to
operate this shredder.
• Never allow children or people unfamiliar with these
instructions to use the garden shredder. Local regulations may
restrict the age of the operator.
• The operator or user of this garden shredder is responsible for
accidents or hazards occurring to other people or their property.
Preparation
•
Do not allow children to operate this equipment.
• Do not operate this equipment in the vicinity of bystanders.
• Wear ear protection and safety glasses at all times while
operating the machine.
• Avoid wearing clothing that is loose fitting or that has hanging
cords or ties.
• Only operate the machine in open space (e.g. not close to a
wall or a fixed object) and on a firm, level surface.
• Do not operate the machine on a paved or gravel surface where
ejected material could cause injury.
• It is recommended that the shredder should be used with a
Residual Current Device (RCD) with a tripping current of no
more than 30mA.
• Before starting the machine, check that all screws, nuts, bolts,
and other fasteners are properly secured and that guards and
screens are in place. Replace damaged or unreadable labels.
Maintenance and storage
•
When the machine is stopped for servicing, inspection,
storage, or to change an accessory, disconnect the power
source, make sure that all moving parts have come to a
complete stop and, where a key is fitted remove the key.
Allow the machine to cool before making any inspections,
adjustments, etc.
• The unit is fitted with an interlock feature which will disable the
shredder from operation when the metal housing is removed.
When sevicing the cutting means be sure to disconnect the
power supply as a secondary precaution. Always wear
protective equipment when servicing blades, as the sharp
edges are capable of inflicting serious injury.
• Turn the shredder off and wait for all moving parts to stop
before clearing the clippings or attaching or removing a
collection device from the front of the debris chute.
• Cord replacement should only be carried out by an authorised
person or by a Ryobi authorised service centre.
• This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of
the appliance by a person responsible for their safety.
Operation
•
Before starting the machine, look into the feeding chamber to
make certain that it is empty.
• Keep your face and body away from the feed intake opening.
• Do not allow hands or any other part of the body or clothing
inside the feeding chamber, discharge chute, or near any
moving part.
• Keep proper balance and footing at all times. Do not overreach.
Never stand at a higher level than the base of the machine
when feeding material into it.
•
Always stand clear of the discharge zone when operating this
machine.
• When feeding material into the machine be extremely careful
that pieces of metal, rocks, bottles, cans or other foreign
objects are not included.
• If the cutting mechanism strikes any foreign objects or if the
machine should start making any unusual noise or vibration,
shut off the power source and allow the machine to stop.
Disconnect from supply and take the following steps:
1). Inspect for damage.
2). Check and tighten any loose parts.
3). Have any damaged parts replaced or repaired with parts
having equivalent specifications.
• Do not allow processed material to build up in the discharge
zone; this may prevent proper discharge and can result in
kickback of material through the feed intake opening.
• If the machine becomes clogged, shut off the power source
and disconnect from supply before clearing debris. Keep the
power source clear of debris and other accumulations to
prevent damage to the power source or possible fire.
Remember that operating the starting mechanism on engine
powered machines will still cause the cutting means to move.
• Keep all guards and deflectors in place and in good working
condition.
• Do not transport the machine whilst connected to a live power
source.
• Always switch the shredder off and disconnect from the
power source whenever you leave the work area.
• Do not tilt the machine whilst the unit is running.
This appliance complies with the compulsory safety regulations
for electric equipment. However, improper use can be harmful to
people and property. Please read these operating instructions
carefully and completely before switching the appliance on.
Save these instructions. Refer to them frequently and use them
to instruct others who may use this product. If you loan someone
this tool, loan them these instructions also.
WARNING!
The appliance is not intended for use by young children or
infirm persons unless they have been adequately supervised by
a responsible person to ensure that they can use the appliance
safely. Young children should be supervised to ensure that they
do not play with the appliance.
WARNING!
When using this garden shredder basic safety precautions,
including the following, should be followed to reduce the risk of
fire, electric shock and personal injury. Read all of these safety
instructions carefully before operating this garden shredder.
Make sure that you are familiar with the controls and the proper
and safe use of the garden shredder.
WARNING!