4
English
88. Flat file
Figure 56
89. restore original shape by rounding the front
Figure 57
90. lubricating hole
Figure 58
7. engine cover
Figure 59
91. air filter
Figure 61
25. Idle speed screw “t”
Figure 62
92. Chain brake
5. Chain lubricant cap
16. Fuel cap
93. post
94. starter cover
104. t25 torx screwdriver
Figure 63
95. Clean engine fins
Figure 64
96. Clean flywheel fins
Figure 65
97. Fuel filter
Figure 67
98. Deflector
99. Deflector retaining nut
100. spark arrestor
103. Gasket
20. muffler
101. Bumper spike bar
102. Bolt & nut
Figure 68
24. Clean the chain brake
INTENDED USE
this chainsaw is designed for cutting branches, trunks,
logs and beams of a diameter determined by the cutting
length of the guide bar. It is only designed to cut wood. It
is only to be used outdoors, by adults.
Do not use the chainsaw for any purpose not listed
above. this chainsaw is not to be used for professional
tree services. It is not to be used by children or by
persons not wearing adequate personal protective
equipment and clothing.
RESIDUAL RISkS:
even when using the chainsaw as intended, there
remains a residual risk of harm which cannot be fully
prevented. the following list of potential hazards should
be read and understood. You should pay extra attention
and care to these items to reduce the risk of occurrence
or injury.
n
Contact with exposed cutting teeth and saw chain.
n
access to rotating parts (the saw chain)
n
unexpected, abrupt movement (kick back) of the
guide bar.
n
Flying chain parts (thrown off or broken)
n
Flying material (cut from the work piece)
n
Inhalation of saw dust and particles or emissions from
the petrol engine.
n
skin contact with petrol / oil.
n
loss of hearing if no hearing protective equipment
worn during use.
GENERAL SAFETy RULES
WARNING
read and understand all instructions. Failure to
follow all instructions listed below may result in
fire and/or serious personal injury.
READ ALL INSTRUCTIONS
n
know your tool.
read the operator’s manual
carefully. learn the saw’s applications and limitations
as well as the specific potential hazards related to
this tool. We recommend you attend a professional
training course to increase your awareness and
proficiency in all chainsaw operations.
n
kickback may occur
when the nose or tip of the
guide bar touches an object, or when the wood closes
in and pinches the saw chain in the cut. tip contact
in some cases may cause a lightning-fast reverse
reaction, kicking the guide bar up and back toward
the operator. pinching the saw chain along the top
of the guide bar may push the guide bar rapidly
back toward the operator. either of these reactions
may cause you to lose control of the saw, which
could result in serious personal injury. Do not rely
exclusively upon the safety devices built into the saw.
as a chainsaw user, you should take every step to
keep your cutting jobs free from accident and injury.
n
With a basic understanding of kickback, you can
reduce or eliminate the element of surprise. sudden
surprise contributes to accidents.
n
Keep a good firm grip on the saw with both hands
when the engine is running. place your right hand
on the rear handle and your left hand on the front
handle with your thumbs and fingers encircling the
