3
English
designed.
b) Do not use the power tool if the switch does not
turn it on and off.
Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
c) Disconnect the plug from the power source before
making any adjustments, changing accessories,
or storing power tools.
Such preventive safety
measures reduce the risk of starting the power tool
accidentally.
d) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool.
Power tools are dangerous in the hands
of untrained users.
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power
tool’s operation.
If damaged, have the power tool
repaired before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc.
In accordance with these instructions, taking into
account the working conditions and the work to
be performed.
Use of the power tool for operations
different from those intended could result in a
hazardous situation.
SERVICE
Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This
will ensure that the safety of the power tool is maintained.
OTHER GENERAL WARNINGS
n
Know your power tool.
Read owners manual
carefully. Learn its applications and limitations as well
as the specific potential hazards related to this tool.
n
Use the right tool.
Do not force a small tool or
attachment to do the job of a heavy duty tool. Do not
use a tool for purposes not intended.
n
Protect your lungs.
Wear a dust mask if operation is
dusty.
n
Do not operate in poor lighting.
Use the unit only in
daylight or good artificial light.
n
Disconnect the plug immediately from the power
source if the mains or extension lead is damaged
or severed.
n
Stay alert and exercise control.
Watch what you are
doing and use common sense. Do not operate the
tool when you are tired. Do not rush operation of the
tool.
n
Check for damaged parts.
Before use of the tool,
guards and all other parts should be carefully
checked to determine that it will operate properly and
perform its intended function. Check for alignment of
moving parts, binding of moving parts, breakage of
parts, mounting and any other conditions that may
affect its operation. A guard or any other part that is
damaged should be properly repaired or replaced by
an authorised service centre.
n
Do not use tool if switch does not turn it on and off.
Have defective switches replaced by an authorised
service centre.
n
Do not operate this tool while under the influence
of drugs,
alcohol or any medication.
n
The appliance is not intended for use by young or
infirm persons.
n
Young children should be supervised to ensure
that they do not play
with the tool.
n
The use of an earth-leakage circuit breaker
of residual current device, the tripping current
of 30mA or less, in conjunction with this tool is
recommended.
n
Maintain the chainsaw with care.
Keep the power
cord clear of the chain at all times. Never carry the
saw by the cord or pull on the cord to disconnect it
from the socket.
n
Chain tension.
Make sure that the chain tension is
correct, as specified in these instructions. Incorrect
tension may cause the chain to disengage from the
guide bar, which is extremely dangerous.
n
Extension cord.
When an extension cord is used
make sure:
(a) That pins on the plug of the extension cord are
the same in number, size and shape as those of
the plug on the saw.
(b) That extension cord is properly wired and in good
electrical condition.
(c) That the wire size is large enough for the AC
ampere rating of the chain saw.
SPECIAL SAFETY INSTRUCTIONS
n
Keep all parts of the body away from the chain
when operating. Before you start, make sure the
chain is not contacting anything.
A moment of
inattention while operating chainsaws may cause
serious injury.
n
Always hold the chainsaw with your right hand
