Ryobi RC18150U, Original Instruction

Page: 3 / 12

3
Safety, performance, and dependability have been given
top priority in the design of your charger.
INTENDED USE
The charger is only intended to charge Ryobi 18V ONE+
lithium-ion battery packs. Do not charge Ni-Cad battery
packs with the charger.
The product is only for use indoors in dry conditions.
The product is not intended to charge any other type of
battery or be used as a power supply or any other purpose.
It should never be used in explosive or inflammable
environments.
CHARGER SAFETY WARNINGS
WARNING
The product is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the product by a person responsible
for their safety.
Children should be supervised to ensure that they do not
play with the product.
Please read and observe these instructions before using the
product. Failure to follow these instructions and warnings
increases the risk of electric shock, fire and explosion.
WARNING
Do not recharge primary cells (non-rechargeable).
WARNING
Mains voltage must correspond with the voltage
specifications on the product.
■ Before using the product, check that the product
enclosure, cable and adaptor plug are not damaged. If
damage is found, do not use and follow the instructions
in the maintenance section of this manual.
■ The product must not be damp, and should never be
used in a damp environment.
■ The product is for indoor use only.
■ Do not use the product if it has suffered any heavy
shock or jolting, or is damaged in any other way.
■ Do not conduct charging in a position which may
become exposed to sunlight or other heat source.
Recommended temperature range at charging vicinity
is 10° to 25° C.
■ Due to the heat generated during charging, the product
should not be operated on a combustible surface.
■ Do not conduct charging operations in the vicinity
of flammable materials. Example: Cloth, packaging
materials, paint, spray paint or aerosols, lubricant,
thinners, petrol containers, gas containers or gas
appliances.
■ Do not cover any ventilating slots and provide adequate
ventilation during operation.
■ Never modify, disassemble or attempt to repair the
product yourself.
■ Do not allow the charger or batteries to become
contaminated with any material which could be
conductive. Example: Metal particles from grinding,
cutting or machining processes.
■ Remove the plug of the product from the power socket
when it is not in use or when cleaning it.
■ Only use extension cable that is approved and in good
condition.
■ Protect battery contacts to avoid a short circuit caused
by metallic objects which could cause a fire or explosion!
■ Do not charge batteries which show signs they have
leaked electrolyte. Dispose of them properly.
■ Never charge a damaged battery pack. If damaged,
replace immediately.
■ If the battery is not going to be used for a while, remove
the charger plug from the power socket and take the
battery off the product.
KNOW YOUR PRODUCT
See page 6.
1. Battery port
2. Red LED
3. Green LED
4. USB charging port
5. Cord storage
6. Key hole hanger
OPERATION
BATTERY PROTECTION FEATURES
Ryobi One+ 18V lithium-ion batteries are designed with
features that protect the lithium-ion cells and maximize
battery life.
If the tool stops during use, release the trigger to reset and
resume operation. If the tool still does not work, the battery
needs to be recharged.
CHARGING THE BATTERY PACK
Use only Ryobi One+ 18V battery packs with this charger.
Battery packs for this tool are shipped in a low charge
condition to prevent possible problems. Therefore, you