9
OPERATION
WARNING.
Never inflate the objects
above the recommended inflation
pressure as this may be dangerous and
cause damage and/or injuries.
WARNING.
The gun is not suitable for
inflating car tyres. For this operation, use
of an approved inflation gun that can be
purchased separately is recommended.
USING THE INFLATION GUN
Connect the inflation gun to the compressor as
explained in chapter “Connecting Accessories” on
page 7.
When inflating tyres or certain bicycle tyres, it is not
necessary to insert any of the adapters (Fig.4).
Press tab E (Fig.5) and connect the hose of the
gun to the tyre pushing the fitting on the valve and
then releasing the tab.
Regulate the working pressure to the value
indicated for this accessory (see table 1).
Inflate the tyre pressing lever F (Fig.6). Release the
lever and read the pressure reached on gauge G of
the gun. Repeat the operation until the pressure
required is obtained (do not exceed the
recommended inflation pressure shown in table 1).
In the case of over-inflation, press button H to
reduce inflation pressure
WARNING.
Do not hold down the lever
too long before checking the pressure
reached as this could cause explosion of
the object being inflated.
When inflating footballs, rubber dinghies, certain
bicycle tyres and children’s inflatable swimming
pools, you may have to use a suitable adapter
(Fig.4).
Adapter 5 is used for certain bicycles.
Adapter 6 is used for footballs.
Adapter 7 is used for rubber dinghies, air beds and
children’s swimmingpools.
Select the suitable adapter and push it in the
inflation hose pressing tab E (Fig.7). Once it is
inserted, release tab E.
To secure the adapter, turn it slightly in a clockwise
direction.
Inflate the object concerned as described above.
Fig. 4
Fig. 5
Fig. 6
Fig. 7
E
E
F
G
H
5
8
7
E
6
Summary of Contents for RC-1500
Page 12: ......