5
ENGLISH
ADJUSTING SPEED (Fig. 7)
The suction / blow speed of the unit can be adjusted
by turning the variable speed control forward (increase
speed) or backward (reduce speed).
EMPTYING THE COLLECTION BAG
It is not necessary to remove the collection bag from the
unit when the bag needs to be emptied.
■
Open the full length zip at the rear of the bag and
empty the contents.
■
Ensure the zip is closed prior to operating the blower
/ vac.
MAINTENANCE
WARNING
Never use water to clean the product. Do not
clean with chemicals or solvents as some can
destroy critical plastic parts.
■
Switch off and disconnect from the power supply
before cleaning your product.
■
Use only a dry cloth for cleaning.
■
Empty the collection bag after each use to avoid
deterioration and obstruction of the air flow which will
reduce the performance of the unit.
■
Clean the collection bag as needed. With eye
protection on, turn the dust bag inside out after initial
emptying and vigorously shake out the dust and debris.
■
Check and clear debris around the quick change lever.
Ensure the discharge side of the tube is free of debris
and dirt. Operate the selector lever backwards and
forwards to ensure correct operation
■
Store the blower / vac in a dry place, and out of reach
of children.
POWER CORD MAINTENANCE
If the supply cord needs replacing, the task must be
carried out by the manufacturer, the manufacturer’s
agent, or an authorised service centre in order to avoid a
safety hazard.
DISPOSAL
Waste electrical products should not be
disposed of together with household waste.
Please recycle where facilities exist. Check
with your local authority or retailer for recycling
advice.
20131209v3
