background image

7

Safety, performance, and dependability have been given 

top priority in the design of your petrol blower/vacuum.

INTENDED USE

The product is only intended for use outdoors.
The product is not intended to be used by children 

or persons with reduced physical, mental, or sensory 

capabilities.
The product is intended for blowing a jet of air to move light 

debris including leaves, grass, and other debris including 

waste paper. You may use the product in driveways and 

walkways.
It is intended to vacuum debris as mentioned above and 

deposit it into the collection bag. It is not designed to suck 

or vacuum water or other liquid.
Do not use the product in any way other than those stated.

 WARNING

When using the product, the safety rules must be 

followed. For your own safety and that of bystanders, 

please read these instructions before operating the 

product. Please keep the instruction safe for later use.

   WARNING

Never allow children or people with reduced physical, 

sensory or mental capabilities to operate, clean, or 

maintain the product. Local regulations may restrict the 

age of the operator.

GENERAL SAFETY WARNINGS

 

Some regions have regulations that restrict the use of 

the product. Check with your local authority for advice. 

 

Do not allow children or untrained individuals to use the 

product.

 

Ensure before each use that all controls and safety 

devices function correctly. Do not use the product if the 

off switch does not stop the engine.

 

Never start or run the engine in a closed or poorly 

ventilated area; breathing exhaust fumes can kill.

 

Clear the work area before each use. Remove all 

objects such as rocks, broken glass, nails, wire, or 

string that can be blown a considerable distance by 

high velocity air.

 

Wear full eye and hearing protection while operating 

the product. The product is extremely noisy, and 

permanent hearing injury may result if precautions 

to limit exposure, reduce noise, and wear hearing 

protection are not strictly adhered to.

 

Wear heavy long trousers, boots, and gloves. Do not 

wear loose fitting clothing, short trousers, jewellery of 

any kind, or use with bare feet.

 

Secure long hair so it is above shoulder level to prevent 

entanglement in moving parts.

 

Beware of thrown objects; keep all bystanders, children, 

and pets at least 15 m away from the work area.  

 

Operate the product only at reasonable hours – not 

early in the morning or late at night when people might 

be disturbed.

 

Use rakes and brooms to loosen debris before blowing/

vacuuming.

 

Never operate the product in an explosive atmosphere.

 

Do not use this product when you are tired, ill, or under 

the influence of alcohol, drugs, or medication.

 

Do not operate the product in poor lighting. The 

operator requires a clear view of the work area to 

identify potential hazards.

 

Use of hearing protection reduces the ability to hear 

warnings (shouts or alarms). The operator must pay 

extra attention to what is going on in the working area.

 

Only use enough throttle (power) to complete the task, 

this will reduce the potential for injury caused by noise 

and vibration.

 

Operating similar tools nearby increases both the risk 

of hearing injury and the potential for other persons to 

enter your working area.

 

Keep firm footing and balance. Do not overreach. 

Overreaching can result in loss of balance or exposure 

to hot surfaces.

 

Keep all parts of your body away from any moving part. 

Rotating impeller blades can cause severe injury. Stop 

the engine and ensure impeller blades have stopped 

rotating before opening the vacuum door, installing/

changing tubes, and opening or removing the debris 

bag.

 

Do not touch the area around the muffler or the engine 

of the product; these parts get very hot during operation.

 

Inspect the product before each use. Check for loose 

fasteners, fuel leaks, etc. Make sure all guards and 

handles are properly and securely attached. Replace 

any damaged parts before use.

 

Be aware of left-handed, threaded fasteners (when 

fitted).

 

Never run the product without the proper equipment 

attached. When used as a blower, always install the 

blower tubes and close the door. When used as a 

vacuum, always install the vacuum tubes and vacuum 

bag.

 

Do not modify the product in any way or use parts 

and accessories that are not recommended by the 

manufacturer.

 

 WARNING

If the product is dropped, suffers heavy impact or begins 

to vibrate abnormally, immediately stop the product and 

inspect for damage or identify the cause of the vibration. 

Any damage should be properly repaired or replaced by 

an authorised service centre.

 

Stop the engine and allow it to cool down before 

refuelling, storing, or transporting the product.

 

For refuelling and fuel mixing, choose a well-ventilated  

area away from sources of ignition (sparks, flames 

etc.), and flammable materials. 

Summary of Contents for RBV254ON





















Reviews: