ASSEMBLY
ATTACHING THE BLOWER/VACUUM TUBES TO
THE MAIN BODY
Before installing the upper blower/vacuum tube
section remove the 2 screws in place B & C. Push
the upper blower/vacuum section firmly into the
main body until it clicks into place. Use a
connection screw in place D, Fig.3, reinstall the two
screws in place B & C and fasten with a phillips
screwdriver.
Note: Make sure all the connections between the
tubes and motor housing are properly secured prior
to operation.
ATTACHING THE WHEELS
Push the wheel section firmly onto the front end of
the blower/vacuum tube and fasten the screw with
a phillips screwdriver, Fig.4.
ATTACHING AND COLLECTION BAG
Slide the opening of the plastic bracket on the
collection bag over the discharge outlet on the
bottom of the motor housing.
Ensure the locking tabs, Fig.5 (5.1), locate onto the
two slots on the blower/vacuum body (5.2).
Attach the front of the collection bag to the
underside of the blower/vacuum tube using the clip
fitted to the debris collection bag, Fig.6.
ATTACHING THE HARNESS
Clip the shoulder harness onto the harness hook
on top of the motor housing, Fig.7.
Adjust the shoulder strap so that it is in a
comfortable position for you.
Note: The shoulder harness is provided to reduce
fatigue and aid comfort when using the
blower/vacuum and can be worn in a position to
suit the operator.
Fig. 4
Fig. 5
8
Fig. 6
Fig. 7
Fig. 3
B
C
D
5.1
5.2