3
English (Original Instructions)
Use 2-stroke oil for air cooled engines.
Mix the fuel mix thoroughly and also each
time before refuelling
Blade thrust may occur without warning if
the blade snags, stalls or binds.
Wear eye and hearing protection when
operating this product.
10
Set the choke lever to “RUN” position.
10
Set the choke lever to “FULL” choke
position.
Fully press and release the primer bulb
10 times.
10
Pull the starter grip until the engine
attempts to start.
Risk of getting a cut.
Lock the throttle in position by depressing
the throttle interlock button.
10
Squeeze throttle trigger to run
Direction of handle rotation
C-Tick compliance mark. Product meets
applicable regulatory requirements.
113
83
Guaranteed sound pressure and sound
power lever
Pull: Quick release tab
Lock
Unlock
DESCRIPTION
Figure 1
1. Starter grip
2. Foam handle
3. Harness hanger
4. Knob
5. Trigger handle
6. Throttle trigger
7. Throttle lock
8. Throttle interlock
9. Ignition switch
10. Bike handle
11. Left handle
12. Shaft
13. Gear head
14. Tri-arc™ blade
15. Blade guard
16. Cutting line
17. Grass de
fl
ector
18. Line cut-off blade
19. Shoulder harness
20. Knob
21. Button
22. Guide recess
Figure 2
4. Knob
Figure 3
3. Harness hanger
23. Shoulder harness
24. Quick release tab
25. Latch
Figure 4
15. Blade guard
17. Grass de
fl
ector
26. Guard screws
27. Guard mounting bracket
28. Slot
29. Threaded mounting plates
30. Locking tabs
Figure 5
31. Drive shaft adaptor
32. Cutting head housing
33. Bump head spring
34. Bump head securing bolt
35. Line spool