9
OPERATION
ENGAGE AIR BLOWING
Air blowing will be engaged if the operator presses
the throttle trigger to increase the engine speed.
TIPS FOR WORKING
To keep from scattering debris, blow around the
outer edges of a debris pile. Never blow directly
into the center of a pile.
Operate power equipment at reasonable hours only
- not early in the morning or late at night when
people might be disturbed. Comply with the times
listed in local ordinances.
To reduce sound levels, limit the number of pieces
of equipment used at any one time.
Conserve water by using power blowers instead of
hoses for many lawn and garden applications,
including areas such as gutters, screens, patios,
grills, porches, and gardens.
Operate blower at the lowest possible throttle
speed to do the job.
Check your equipment before operation, especially
the muffler, air intakes, and air filters.
Use rakes and brooms to loosen debris before
blowing.
In dusty conditions, slightly dampen surfaces when
water is available.
Watch out for children, pets, open windows, or
freshly washed cars, and blow debris safely away.
After using blowers or other equipment, CLEAN
UP! Dispose of debris properly.
MAINTENANCE
CLEANING AND CARE
Correct and regular cleaning is not only important
for the safe use of this product, but also extends its
life span.
WARNING.
Always stop the engine and
wait for cool down of the engine.
Please remove dust, grass etc. from machine after
every application. Clean the machine with a wet
cloth. Use a brush to clean hard-to-reach areas.
You may use pressurised air to remove persistent
dust.
Note: Do not use chemical, acid, alkaline, grinding
or other aggressive cleaning agents. They could
destroy the surface of the product.
MAINTENANCE
WARNING.
Always stop the engine and
wait for the engine to cool down.
INSPECTION AND MAINTENANCE SCHEDULE
The maintenance interval is only a
recommendation for machines in ordinary
operating condition. If there are any abnormal signs
from the machine, please do the proper inspection
and maintenance immediately.
The tightening torque should follow the general
screw specification of different size, class and
material.
If anything is unclear to you, please contact our
service team for help.
All other repairs or maintenances which are not
mentioned here shall only be done by our service
team or authorized personnel.
Item
Engine lubricant oil
level
Loosened or lost
screws
Damage of any part
Function of control
elements
Fuel level
Leakage of oil or fuel
Engine oil replacement
Air filter cleaning
Spark plug check
Hours of operation
Every time before use
Every time before use
Every time before use
Every time before use
Every time before use
Every time before use
Every 20 hours
Every 20 hours but
every 10 hours if work
condition is dusty.
Every 20 hours