1
English
GENERAL SAFETY RULES
■ Always wear personal protective safety glasses,
gloves, ear protectors, face mask or respiratory
equipment and protective clothing.
■ Always ensure machine is switched off before
connecting air supply.
■ Disconnect any machine from the air supply before
changing accessories, and before servicing any type
of machine.
■ Do not wear watches, rings, bracelets or loose clothing
when using air tools.
■ Do not overload the machine. Allow the tool to operate
at its optimum speed for maximum efficiency.
■ Do not increase the air pressure above the
manufacturer's recommended level, as excessive
overload can cause the machine casing to split. Also
this creates excessive wear on moving parts and
possible failure.
■ In the interest of safety and to prevent possible
damage/injury to the machine/operator, always ensure
that the machine has stopped before putting it down
after use.
■ Always ensure that the work piece is firmly secured
leaving both hands free to control the machine.
■ Always ensure that the accessories are rated/designed
for use with the machine and are also correctly and
securely fastened before connecting the machine to
the air supply.
■ Ensure you read, understand and apply safety
instructions before use.
■ Keep children away from tools and workplaces.
■ Air tools are not generally insulated and should not
come in contact with electric power sources.
■ Insert tool speed should be higher than speed of the
die grinder.
■ Pay attention while working with certain materials that
will create emission of dust and fumes. This will cause
potentially explosive environment.
■ Pay attention to the risk of hair or loose clothing being
drawn in or trapped in the tool.
■ Pay attention to the whipping compressed air hose.
■ Pay attention to the fact that allowed speed of the
mounted point must be lowered due to the increase
of the length of the shaft between the end of the collet
and the mounted point (overhang). Make sure that the
minimum gripping length of 10 mm is observed.
■ Die grinders should not be used in an explosive
environment.
■ Check the speed and make a simple check of the
vibration level after each service.
■ Special care has to be taken when assembling the
speed governor or protective devices.
■ Check the speed after each service in relevant cases.
■ The spare parts would not affect the health and safety
of the operator.
SYMBOLS
Wear ear protection
Wear eye protection
Please read the instructions carefully before
starting the tool.
SPECIFICATIONS
Grinder cap
6.35 mm (1/4”)
No-load speed
22,000 rpm
Air consumption
251 L/min (8.8 cfm)
Operating pressure
90 psi (6.3 bar)
Air inlet size
6.35 mm (1/4”)
Air hose ID
9.52 mm (3/8")
Weight
0.65 kg
A weighted sound
pressure level
83.5 dB(A) + 3dB
Sound power level
94.5 dB(A) + 3dB
Vibration value
1.2 m/s2
Uncertainty
0.353 m/s2
Noise Emission Values is in accordance with EN ISO 4871
and EN ISO 15744.
Vibration emission value is in accordance with EN 12096,
EN 28662-1 and EN ISO 8662-13.
APPLICATIONS
The tool is ideal for light weld grinding, porting and
polishing applications. The durable and lightweight
composite housing design also helps reduce vibration.
It has a lever lock throttle for safety. Any other use is
forbidden.
AIR SUPPLY AND OPERATION
■ Ensure air valve (or trigger) is in the “off” position
before connecting to the air supply.
