background image

5

Original Instructions

SYMBOLS ON THE PRODUCT

Read and understand 

all instructions before 

operating the product. Follow 

all warnings and safety 

instructions.

Wear a complete personal 

protective equipment when 

operating the product.

IPX5

Degree of protection.

Wear eye protection.

Never point the gun to 

human, animals, the product, 

power supply, or any electric 

appliances.

 

Do not spray flammable liquids 

to avoid the risk of explosion. 

Flammable liquids and their 

vapors are explosive and can 

cause severe burns or death.

Kickback. To reduce the risk of 

injury from kickback, hold the 

trigger handle securely with 

both hands when the product 

is on. 
Failure to use the product in 

dry conditions and to observe 

safe practices can result in 

electric shock.

Do not point the spray directly 

at any person or animal to 

avoid the risk of injection or 

severe injury.

The product is not suitable 

for connection to the drinking 

water supply without backflow 

preventer.

Regulatory Compliance 

Mark (RCM). Product 

meets applicable regulatory 

requirements.

93

Guaranteed sound power level

Waste electrical products 

should not be disposed of with 

household waste. Recycle 

where facilities exist. Check 

with your local authority or 

retailer for recycling advice.

SYMBOLS IN THIS MANUAL

Parts  or  accessories  sold 

separately

Note

Warning

Connect to the power outlet.

Disconnect from the power 

outlet.

Summary of Contents for RACPWS4





















Reviews: