9
WARNING
Do not use any attachments or accessories not
recommended by the manufacturer of this tool. The use
of attachments or accessories not recommended can
result in serious personal injury.
LUBRICATION
$Q
DXWRPDWLF
LQOLQH
¿OWHUUHJXODWRUOXEULFDWRU
LV
UHFRPPHQGHG)LJDVLWLQFUHDVHVSURGXFWOLIHDQGNHHSV
the product in sustained operation. The in-line lubricator
VKRXOGEHUHJXODUO\FKHFNHGDQG¿OOHGZLWKDLUWRRORLO
Proper adjustment of the in-line lubricator is performed by
placing a sheet of paper next to the exhaust ports and
actuate the tool 10 - 15 times without fasteners loaded.
The lubricator is properly set when a light stain of oil
collects on the paper. Excessive amounts of oil should be
avoided.
If it becomes necessary to store the product for an extended
SHULRGRIWLPHRYHUQLJKWZHHNHQGHWFLWVKRXOGUHFHLYH
a generous amount of lubrication at that time. Actuate the
tool 10 - 15 times without fasteners loaded to ensure oil
has been evenly distributed throughout the product. The
product should be stored in a clean and dry environment.
Ɣ
It is most important that the product be properly
lubricated by keeping the air line lubricator filled
and correctly adjusted. Without proper lubrication
the product will not work properly and parts will
wear prematurely.
Use correct lubricant in the air line lubricator. The
lubricator should be of low air flow or changing air flow
type, and should be kept filled to the correct level. Use only
recommended lubricants, specially made for pneumatic
applications. Substitutes may harm the rubber compounds
in the product's O-rings and other rubber parts.
IMPORTANT!
6HH¿JXUH
,I D ¿OWHUUHJXODWRUOXEULFDWRU LV QRW LQVWDOOHG RQ WKH DLU
system, air operated tools should be lubricated at least
once a day or after 2 hours of work with 2 - 6 drops
of oil, depending on the work environment, directly
WKURXJKWKHPDOH¿WWLQJLQWKHWRROKRXVLQJ
20140515v1
