Ryobi R4SDC, Original Instructions Manual

Page: 9 / 16

7
LUBRICATION
All of the bearings in the product are
lubricated with a sufficient amount of
high grade lubricant for the life span
of the product under normal operating
conditions. Therefore, no further
lubrication is required.
ENVIRONMENTAL PROTECTION
Recycle raw materials instead
of disposing of as waste. The
machine, accessories, and
packaging should be sorted for
environment-friendly recycling.
SYMBOLS
Safety alert
Regulatory Compliance
Mark (RCM). Product
meets applicable regulatory
requirements.
Please read the instructions
carefully before starting the
machine.
Please read the instructions
carefully before starting the
machine.
Class II equipment
For indoor use only
No-load speed
Polarity of USB plug
V Volts
Direct current
min
-1
Revolutions or
reciprocations per minute
Waste electrical products
should not be disposed
of with household waste.
Please recycle where
facilities exist. Check with
your local authority or
retailer for recycling advice.
SYMBOLS IN THIS MANUAL
Note
Parts or accessories sold
separately
The following signal words and meanings
are intended to explain the levels of risk
associated with this product:
DANGER
Indicates an imminently hazardous
situation, which, if not avoided, will result
in death or serious injury.
WARNING
Indicates a potentially hazardous
situation, which, if not avoided, could
result in death or serious injury.
CAUTION
Indicates a potentially hazardous
situation, which, if not avoided, may result
in minor or moderate injury.
CAUTION
(Without Safety Alert Symbol) Indicates
a situation that may result in property
damage.