7
Getting started
8
Insert the battery pack until the latch
clicks into place.
2
1
x2
3
Install hex screws to hold the safety
guard in place. Turn the hex screws
clockwise to tighten and secure the
safety guard.
2
3
1
1
2
1
2
1
2
1
2
3
1
6
4
5
9
7
4
7
2
Always wear safety goggles or safety
glasses with side shields when
operating the product. Wear non-slip,
heavy-duty protective gloves. Wear
non-skid, protective footwear that will
protect your feet and improve your
footing on slippery surfaces.
Install the safety guard to the trimmer
head.
Turn the wing nut counterclockwise to
loosen the clamp and remove the screw
from the front handle.
Insert the upper shaft into the lower
shaft. Insert the nuts in the hex holes.
Secure the upper shaft and lower shaft
with bolts. Ensure to lock it in place with
the nuts.
Attach the front handle on the upper
drive shaft at a comfortable position.
Secure the front handle by turning the
wing nut clockwise.
Press and hold the lock-out trigger, and
squeeze the on/off trigger to turn on the
product.
Summary of Contents for R36XLTR10
Page 1: ...R36XLTR10 R36XLTR26...
Page 19: ......