Ryobi R36XLMW20 Manual Download Page 2

2

Original Instructions

IMPORTANT!

It is essential that you read the instructions 

in this manual before assembling, operating, 

and maintaining the product.

Subject to technical modification.

Safety, performance, and dependability have 

been given top priority in the design of your 

cordless lawnmower.

INTENDED USE

The cordless lawnmower is intended for 

outdoor use only.
The product is designed for domestic lawn 

mowing. It is a pedestrian-controlled walk-

behind mower designed to be pushed by hand 

or used with the self-propel feature.
The product should never be operated with the 

wheels off the ground. It should not be pulled 

or ridden on.
Do not use the product for any other purpose.

GENERAL SAFETY WARNINGS

 

Keep the instructions safe for later use.

 

The product should be operated only with 

the battery packs specified in this manual. 

When using a battery-operated product, 

basic safety precautions should always be 

followed to reduce the risk of fire, leaking 

batteries, and personal injury.

PERSONAL SAFETY

 

Never allow children or people with reduced 

physical, sensory, or mental capabilities, 

or persons who are not familiar with these 

instructions to operate, clean, or maintain 

the product. Local regulations may restrict 

the age of the operator. Children should be 

adequately supervised to ensure that they 

do not play with the product.

 

Be familiar with the controls and the correct 

use of the product.

 

Wear heavy, long trousers, long sleeves, 

and sturdy anti-slip footwear. Do not wear 

short trousers, sandals, or go barefoot. 

Avoid wearing clothing that is loose-fitting 

or that has hanging cords or ties.

 

Use the product across the face of slopes; 

never up and down. Exercise extreme 

caution when changing direction on slopes. 

Keep firm footing and balance. Walk; never 

run.

 

Do not use the product near drop-offs, 

ditches, excessively steep slopes, or 

embankments.

 

Always wear safety glasses.

 

The product is capable of amputating hands 

and feet, and of throwing objects. Failure to 

observe all safety instructions could result 

in serious injury or death.

 

Stay alert, watch what you are doing, 

and use common sense when operating 

the product. Do not operate the product 

while tired, ill, or under the influence of 

drugs, alcohol, or medication. A lapse in 

concentration while operating the product 

may result in serious personal injury.

WORK AREA SAFETY

 

Never use the product while people, 

especially children, or pets are within 15 

m because of the danger of objects being 

thrown by contact with the blade.

 

Always use the product in daylight or good 

artificial light.

 

Do not operate the product on wet grass or 

in the rain.

 

Keep in mind that the operator or user 

is responsible for accidents or hazards 

occurring to other people or their property.

 

Objects struck by the lawnmower blade 

can cause severe injuries to persons. 

Thoroughly inspect the area where the 

product is to be used, and remove all rocks, 

sticks, metal, wire, bones, toys, or other 

foreign objects. Remember, string or wire 

may entangle with the cutting means.

 

Do not operate the product in explosive 

atmospheres, such as in the presence 

of flammable liquids, gases, or dust. The 

product creates sparks, which may ignite 

dust or fumes.

 

Do not use the product when there is a risk 

of lightning.

 

Tragic accidents can occur if the operator 

is not alert to the presence of children. 

Children are often attracted to the product 

and the mowing activity. Never assume 

that children will remain where you last saw 

them.

 

Use extra care when approaching blind 

corners, shrubs, trees, or other objects, 

including overhanging shrubs, which may 

block your view.

Summary of Contents for R36XLMW20

























Reviews: