Ryobi R18XHTR10, Manual

Page: 14 / 16

PRODUCT SPECIFICATIONS
Cordless hedge trimmer
Model R18XHTR10
Rated voltage 18 V d.c.
No-load speed 1550/min
Cutting length 550 mm
Cutting capacity 24 mm
Vibration level (in accordance with EN 62841-1 and EN 62841-4-2)
Vibration total value 4.7 m/s
2
Uncertainty of measurement 1.5 m/s
2
Noise emission level (in accordance with EN 62841-1 and EN
62841-4-2)
A-weighted sound pressure level 85.4 dB(A)
Uncertainty of measurement 3.0 dB
A-weighted sound power level 93.4 dB(A)
Uncertainty of measurement 3.0 dB
Weight without battery pack 2.4 kg
Weight with heaviest battery pack 3.6 kg
BATTERY AND CHARGER
Model R18XHTR12 R18XHTR10
Battery pack RB1820C -
Weight 0.45 kg -
Charger RC18115 -
Weight 0.35 kg
Compatible battery
packs
RB18L13, RB1820C, RB18L26, RB18L15,
RB18L15A, RB18L15B, RB18L25,
RB18L25A, RB18L40, RB18L40A,
RB18L50, RB18L50A, RB18L20,
RB18L20A, RB18L30, RB18L30A,
RB18L60, RB18L60A, RB18L90,
RB18L90A
Compatible charger BCL14181H, BCL14183H, BCS618,
RC18627U, RC18150, RC18150U,
RC18120, RC18115, BCL1418IV
WARNING! The declared vibration total values and the
declared noise emission values given in this instruction
manual have been measured in accordance with a
standardised test and may be used to compare one tool with
another. They may be used for a preliminary assessment
of exposure.
The declared vibration and noise emission values represent
the main applications of the tool. However, if the tool is used
for different applications, used with different accessories,
or poorly maintained, the vibration and noise emission
may differ. These conditions may significantly increase the
exposure levels over the total working period. An estimation
of the level of exposure to vibration and noise should take
into account the times when the tool is turned off or when
it is running idle. These conditions may significantly reduce
the exposure level over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and noise, such as maintaining
the tool and the accessories, keeping the hands warm (in
case of vibration), and organising work patterns.