Ryobi R18FDF, Original Instructions Manual

Page: 3 / 12

3
Safety, performance, and dependability have been given
top priority in the design of your floor drying fan.
IntenDeD use
The floor drying fan is intended to be used only by adults
who have read and understood the instructions and
warnings in this manual, and can be considered responsible
for their actions.
The product is intended for residential drying of damp or
wet surfaces such as concrete, laminate, and tile floors.
Do not use the product in any way other than those stated
for intended use.
FlooR DRyIng Fan saFety waRnIngs
■ Know the product. Read operator’s manual carefully.
Learn its applications and limitations, as well as the
specific potential hazards related to this tool. Following
this rule will reduce the risk of electric shock, fire, or
serious injury.
■ Do not disassemble the product.
■ Do not attempt to modify the product or create
accessories not recommended for use with the product.
Any such alteration or modification is misuse and could
result in a hazardous condition leading to possible
serious personal injury.
■ Do not use the product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
could result in serious personal injury.
■ Do not use the product to exhaust hazardous or
explosive materials and vapors. It is intended for
ventilation only.
■ Do not open or modify the product, otherwise the
warranty will be voided.
■ to reduce the risk of injury, close supervision is
necessary when a product is used near children.
■ Do not allow children to operate the product. It is
not a toy.
■ Cleaning and user maintenance shall not be made
by children without supervision.
■ never leave the product running unattended.
Remove the battery pack after use.
■ to reduce the risk of personal injury and electric
shock, the product should not be played with or
placed where small children can reach it.
■ It is possible that unsecured hair may be drawn into the
product and may be come entangled and may cause
injury. Keep loose or flying hair away from this product
at all times.
■ Battery tools do not have to be plugged into an electrical
outlet; therefore, they are always in operating condition.
Be aware of possible hazards when not using your
battery tool or when changing accessories. Following
this rule will reduce the risk of electric shock, fire, or
serious personal injury.
■ Do not place battery tools or their batteries near fire or
heat. Following this rule will reduce the risk of explosion
and possibly injury.
■ Never use a battery that has been dropped or received
a sharp blow. A damaged battery is subject to
explosion. Properly dispose of a dropped or damaged
battery immediately.
■ Batteries can explode in the presence of a source
of ignition, such as a pilot light. To reduce the risk of
serious personal injury, never use any cordless product
in the presence of open flame. An exploded battery
can propel debris and chemicals. If exposed, flush with
water immediately.
■ Do not charge battery tool in a damp or wet location.
Following this rule will reduce the risk of electric shock.
■ Do not expose the product to rain. Water entering
the product will increase the risk of electric shock or
malfunction.
■ For best results, your battery tool should be charged
in a location where the temperature is more than 10°C
(50°F) but less than 38°C (100°F). Do not store outside
or in vehicles.
■ Under extreme usage or temperature conditions,
battery leakage may occur. If liquid comes in contact
with your skin, wash immediately with soap and water.
If liquid gets into your eyes, flush them with clean water
for at least 10 minutes, then seek immediate medical
attention.
■ Exhausted batteries are to be removed from the product
and safely disposed of.
■ Keep the product dry, clean and free from oil and
grease. Always use a clean cloth when cleaning.
■ The supply terminals are not to be short-circuited.
■ Save these instructions. Refer to them frequently and
use them to instruct others who may use this tool. If you
loan someone this tool, loan them these instructions
also to prevent misuse of the product and possible
injury.
aDDItIonal batteRy saFety waRnIngs
■ To reduce the risk of fire, personal injury, and product
damage due to a short circuit, never immerse your
tool, battery pack or charger in fluid or allow a fluid to
flow inside them. Corrosive or conductive fluids, such
as seawater, certain industrial chemicals, and bleach
or bleach-containing products, etc., can cause a short
circuit.
tRanspoRtIng lIthIum batteRIes
Transport the battery in accordance with local and national
provisions and regulations.
Follow all special requirements on packaging and labelling
when transporting batteries by a third party. Ensure that
no batteries can come in contact with other batteries or
conductive materials while in transport by protecting exposed
connectors with insulating, non-conductive caps or tape. Do
not transport batteries that are cracked or leaking. Check with
the forwarding company for further advice.
maIntenanCe
■ The product should never be connected to a power
supply when assembling parts, making adjustments,
cleaning, performing maintenance, or when the product
is not in use. Disconnecting the product from the power