14
Maintenance
1
2
1
1
2
1
2
x2
3
4
2
CLEARING A BLOCKAGE IN THE
NOZZLE
NOTE:
The nozzle cap is attached to the
nozzle.
1. Press the latches on the battery pack and
remove it from the product.
2. Turn the nozzle cap counterclockwise to
loosen and remove it from the nozzle.
3. Turn the nozzle counterclockwise to
loosen and remove it from the product.
4. Insert a fine needle into the thread hole
of the nozzle to clear out any blockage or
residue buildup.
NOTE:
There is an o-ring on each side
of the nozzle. Make sure they are not
removed while cleaning the nozzle.
Summary of Contents for R18CWS10
Page 1: ...FRONT PAGE R18CWS10...
Page 6: ...6 Original Instructions...
Page 22: ......
Page 23: ......