1
MAINTENANCE
starter about 6 times. This should remove most of the liquid
from the pump.
PREPARING FOR USE AFTER STORAGE
n
Pull the recoil starter grip three or four times to clean oil
from the combustion chamber.
n
Remove spark plug from the cylinder. Wipe oil from the
spark plug and return it to the cylinder.
n
Reconnect the spark plug wire.
n
Refuel the machine as described earlier in the operator’s
manual.
PERIODIC MAINTENANCE SCHEDULE TABLE
Maintenance Items
Every
Every
Every
Every
Every
Every
8 hrs.
20 hrs.
0 hrs.
200 hrs.
00 hrs.
1,000
(Daily)
(Weekly) (Monthly)
hrs.
Clean engine & check bolts & nuts
X
Check and refill engine oil
X
Change engine oil*
X
X
Clean spark plug
X
Clean air filter
X
Replace air cleaner element
X
Clean fuel cup
X
Clean & adjust spark plug & electrodes
X
Replace spark plug
X
Remove carbon from cylinder head**
X
Check & adjust valve clearance**
X
Clean & adjust carburetor**
X
Replace fuel lines
X
Overhaul engine if necessary**
X
* Initial oil change should be performed after the first 20 hours of operation. Thereafter, change oil every 0 hours of use.
Do not pour old oil down sewage drains, into garden soil, or into open streams. Your local zoning or environmental
regulations will give you more detailed instruction on proper disposal.
** Have performed by your nearest service center
Summary of Contents for PPW-3000
Page 1: ...PETROL PRESSURE WASHER 207 BAR OWNER S OPERATOR S MANUAL PPW 3000 ...
Page 2: ... Fig 1 8 5 6 11 13 12 1 10 14 15 7 3 4 2 9 ...
Page 4: ... Fig 10 Fig 9 Fig 11 7 35 36 4 38 4 37 Fig 12 Fig 13 39 40 11 41 22 10 Fig 14 20 cm 60 cm ...
Page 5: ... Fig 16 2 26 Fig 17 Fig 15 Fig 18 43 42 Fig 19 46 45 29 44 ...
