Ryobi PC30 Operator'S Manual Download Page 23

22

23

WARRANTY

LIMITED WARRANTY STATEMENT

Ryobi Technologies, Inc. warrants to the original retail purchaser that this Ryobi Technologies, Inc. product is free from defect in 
material and workmanship and agrees to repair or replace, at Ryobi Technologies, Inc.’s discretion, any defective product free of 
charge within these time periods from the date of purchase.

Two years if the product is used for personal, family or household use;
90 days, if any of the above products are used for any other purpose, such as commercial or rental.

This warranty extends to the original retail purchaser only and commences on the date of the original retail purchase.
Any part of the Ryobi Technologies, Inc. product manufactured or supplied by Ryobi Technologies, Inc. and found in the reasonable 
judgment of Ryobi Technologies, Inc. to be defective in material or workmanship will be repaired or replaced by an authorized Ryobi 
Technologies, Inc. service dealer without charge for parts and labor.
The Ryobi Technologies, Inc. product including any defective part must be returned to an authorized service dealer within the warranty 
period. The expense of delivering the Ryobi Technologies, Inc. product to the dealer for warranty work and the expense of returning 
it back to the owner after repair or replacement will be paid for by the owner. Ryobi Technologies, Inc.’s responsibility in respect to 
claims is limited to making the required repairs or replacements and no claim of breach of warranty shall be cause for cancellation 
or rescission of the contract of sale of any Ryobi Technologies, Inc. product. Proof of purchase will be required by the dealer to 
substantiate any warranty claim. All warranty work must be performed by an authorized Ryobi Technologies, Inc. service dealer. 
This warranty is limited to ninety (90) days from the date of original retail purchase for any Ryobi Technologies, Inc.  product that is 
used for rental or commercial purposes, or any other income-producing purpose.
This  warranty  does  not  cover  any  Ryobi  Technologies,  Inc.  product  that  has  been  subject  to  misuse,  neglect,  negligence,  or 
accident, or that has been operated in any way contrary to the operating instructions as specified in the Ryobi Technologies, Inc. 
operator’s manual. This warranty does not apply to any damage to the Ryobi Technologies, Inc. product that is the result of improper 
maintenance or to any Ryobi Technologies, Inc. product that has been altered or modified so as to adversely affect the products 
operation, performance or durability or that has been altered or modified so as to change its intended use. The warranty does not 
extend to repairs made necessary by normal wear or by the use of parts or accessories which are either INCOMPATIBLE WITH 
THE RYOBI TECHNOLOGIES, INC. product or adversely affect its operation, performance or durability.
In addition, this warranty does not cover:
A.  Tune-ups – Spark Plugs, Carburetor Adjustments, Filters
B.  Wear items – Bump Knobs, Outer Spools, Cutting Lines, Inner Reels, Starter Pulley, Starter Ropes, Drive Belts, Tines, Felt Washers, 

Hitch Pins, Mulching Blade, Blower Fan, Blower and Vacuum Tubes, Vacuum Bag and Straps, Guide Bar, Saw Chain

Ryobi Technologies, Inc. reserves the right to change or improve the design of any Ryobi Technologies, Inc.  product without assuming 
any obligation to modify any product previously manufactured.
ALL IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE STATED WARRANTY PERIOD. ACCORDINGLY, ANY SUCH 
IMPLIED WARRANTIES INCLUDING MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR OTHERWISE, ARE 
DISCLAIMED IN THEIR ENTIRETY AFTER THE EXPIRATION OF THE APPROPRIATE TWO-YEAR, ONE-YEAR, OR NINETY-
DAY WARRANTY PERIOD. RYOBI’S OBLIGATION UNDER THIS WARRANTY IS STRICTLY AND EXCLUSIVELY LIMITED TO 
THE  REPAIR  OR  REPLACEMENT  OF  DEFECTIVE  PARTS  AND  RYOBI  DOES  NOT  ASSUME  OR  AUTHORIZE  ANYONE  TO 
ASSUME FOR THEM ANY OTHER OBLIGATION. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED 
WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. RYOBI ASSUMES NO RESPONSIBILITY FOR 
INCIDENTAL, CONSEQUENTIAL, OR OTHER DAMAGES INCLUDING, BUT NOT LIMITED TO EXPENSE OF RETURNING THE 
RYOBI TECHNOLOGIES, INC. PRODUCT TO AN AUTHORIZED SERVICE DEALER AND EXPENSE OF DELIVERING IT BACK TO 
THE OWNER, MECHANIC’S TRAVEL TIME, TELEPHONE OR TELEGRAM CHARGES, RENTAL OF A LIKE PRODUCT DURING 
THE TIME WARRANTY SERVICE IS BEING PERFORMED, TRAVEL, LOSS OR DAMAGE TO PERSONAL PROPERTY, LOSS OF 
REVENUE, LOSS OF USE OF THE PRODUCT, LOSS OF TIME, OR INCONVENIENCE, SOME STATES DO NOT ALLOW THE 
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION 
MAY NOT APPLY TO YOU.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
This warranty applies to all Ryobi Technologies, Inc. Products manufactured by Ryobi Technologies, Inc. and sold in the United 
States and Canada.
To locate your nearest service dealer, dial 1-800-860-4050.

Summary of Contents for PC30



























Reviews: