Ryobi OPS18, Original Instructions Manual

Page: 13 / 20

11
MAINTENANCE
2
1
1
2
2
3
REPLACING THE BLADE
1. Press the latches on the battery pack.
Remove the battery pack from the product.
2. Loosen the blade release clock. Remove the
blade from the mounting clamp.
3.
Push and rotate the blade release lock
counterclockwise. Insert the blade into
the blade release lock. Release the blade
release lock.
WARNING: Use only approved pruning blades
in the pruning saw. The blades must be 6”
or less in length and below 25 mm in height.
Any blade larger than this specification can
damage the pruning saw and may void your
warranty.
1
2
1