11
Maintenance
REPLACING OR SHARPENING THE
CUTTING BLADE
NOTE:
Before removing the blade for
sharpening or replacement, ensure that you
have a T10 screwdriver, a #4 wrench, and a
#13 socket wrench. Refer to the replacement
parts list in this manual for the correct
replacement parts.
1. Press the latches on the battery pack to
remove it from the product.
2. Place the product on a level surface
with the housing side facing up. Turn
the screws counterclockwise to unlock.
Remove the housing.
3. Flip the product onto its other side.
4. Turn the locking screw counterclockwise
to remove. Remove the washer
and the gear. Turn the locking nut
counterclockwise to remove.
1
2
T10
#4
#13
1
1
2
2
2
1
4
3
3
4
